Recent content by 04mx

Easy job , did mine in a vice took 10 min .

Can anyone clarify something about the ripsaw track ? my friend was looking at the ripsaw tracks and noticed that the 1” ripsaw is rated to have more (ON TRAIL TRACTION) then the 1.250 does this seem right ? thanks

Didn’t the 2014 vipers have stiffer rear springs ?

Anyone familiar with the 4 hole magnetic clutch weights ? I have a set of ssi arms I could use to add more weight then the stock arms

The guy told me I would loose rpm ?

Should I add or remove weight to compensate for the bigger roller ?

Doesn’t lower rpm mean it’s loading the motor more ?

I'm going to be putting the 16mm clutch rollers on and would like to know how they will affect the shift vs stock rollers ?

I got some 16mm clutch rollers for my winder and would like to know how they will affect the shift vs stock rollers ? Thanks

They look like this

My sd_26 went away with just with the key cycle . It started to do it without any codes showing , after 3 or 4 times trying to get on it the code showed up ! Removed hose 26 and plugged air box nipple . This is what I did for now , not pretty but ............

Outside source !

Did you try blowing through it while applying voltage 3volts ?

Mine was the first one on the clutch side took it off and put a hose on it and blew through it while applying 3vdc to the noid , oily water came out , problem solved ( for now )

Update ... called the dealer and he said to remove and clean the electric valve with the hose going to the air box also to remove the hose from the valve to the air box and cap off the nipple on the air box and just remove the other end of the hose from the electric valve . I put 3volts to...