Recent content by 200smk

So looks like it was the ground block issue. I just removed the yellow block and soldiered all the wires togethor. Reinstalled fuel pump relay and the sled fired right up. I also did 2 other small ground blocks just to hopefully prevent any other grounding issues. Just have to put sled back...

Ok, just did test in diag mode. The yellow light flashes in the 1 second intervals(5 times). But the fuel pump is not doing anything. The ground block does seem to be abit burnt looking or melted. I thought i recall seeing a topic on this somewhere. Is there some kind of an update that can be...

Could it be ignition switch? Switch is activating the relay, but the fuel pump wont go.?? I am at abit of a loss, any suggestions would help. Thanks..

Ok, just checked to see if power was going to plug, and it is. Then tried to activate with a 12v battery, and it did activate the fuel pump. Would I have a possible ground issue?

Not heat related though, more of the thoughts of fuel pump itself. Just thought i should clarify. Tks

That is actually what had happened. We were out on a ride and about 20 miles in to the ride, it just quit. I was able to get it restarted, but just quit again. Now actually in garage, the fuel pump wont even engage. Like i said before, I can hear relay clicking, but now no fuel pump at all...

In a heated garage for last week, and still does same thing..

I did put a 2" riser handle bar on, with new style factory updated handwarmers. Also showing code 81, which is hand warmer code. Checked all wiring along oil tank side for damage or rubbed wires, all is fine. It does show the yellow light on left side of pod. so could that just be bad fuel?

I have a phazer that quit on me, I have since brought home and changed the fuel pump relay, I can hear the relay clicking and when the sled hasn't been run for abit, it will start. But then after about 1-2 minutes it will quit. The old relay was clicking the same as the new one, so I assume...

I've got a used one (900 miles) for sale for $400 plus shipping from Regina.... If you're interested.

Ruckus.....the setback changes the approach angle so it isn't so steep. makes it trench less in the deeper stuff. Jeffz.....RTX 121 skid with some wildchild 136 rail extensions. TSU......sorry dude, called in a favour with a buddy of mine to have them cut out. Its very easy though, I...

Here you go fellas.... I put the 144 Freeride 1.5" on my 08 RTX....with a 136 Rail Ext and a 3.75" skid setback. These are the brackets I made for the rear - about 1/4" thick alum. So far it rides good.....lots more traction on the hardpack.....better traction in the...

Anyone know if that would fit a phazer??? Wonder what it would look like.....looks great on a Nytro.

Yup.......drill worked best! Thanks Again!

Thanks Guys.....I'll give it a try.