Recent content by Broue

It's a factory front end... you'll love it (have the same)!!!

with my new front end!!

I have a set of XTX a-arm for sell. No bent, : excellent condition ; in Montreal area (Quebec province) send me a private message

-1 of camber 23 deg of caster 1/4 inch toe out

you should decrease caster, you'll reduce the steering effort

for an heavier coil over spring (center shock) : you can use a Skidoo part # #503192064

RobWarrior: I had the same feeling after my first ride; I finally changed my center spring for a stiffer one. The upgrade decrease the steering effort. I have no idea of your weight and suspension set up; but It works for me (front spring loose).

Jason, I have a set up close to Herndrop. I got a lighter steering as soon as I changed the OEM spring for an heavier one (ski doo parts). Other point: I run one 6 inch carbide and one runner on my tuner ski.

what's the needed length of the shock?

I'm the one who installed the star relocate and the mountain tech front end kit...

My Nytro is a XTX with star relocate

Had the same issue on my 2009, FYI 2010 and up have OEM plates. I installed them. You shall drilled a hole at the end of the crack to avoid the propagation of the crack.

I have Mountain Tech 43+2: it s a good improvement over stock: corner, bump steer, etc You can ajust camber and caster and the ball joint are huge compare to stock. The steering was stil heavy, so I finally change my center spring for a stiffer one; it light up the steering When I was looking...

The posting has been deleted ... So is anyone have a kit, post me

I m seeking for a Nytro race front end... Anyone I have one ?