Recent content by gumbellion

Thanks for referring me moose. It just so happens that ruggy is an hour and a half away So hopefully i can get some stuff from him and save shipping. I can always use an excuse to go to the lake of the woods brewery for lunch!

The recall was a night and day difference. I only have had the sled for 2 season so it was past the recall date for the repairs. I called yamaha and told them how i bought it used, have a couple yamaha motorcycles, and blah blah blah and the did the recall for free before my sled was even...

I have discovered that I have the base model and want to put a fan on my sled. I have no electrical competence so maybe someone "Bird" for instance could walk me through the process?

I am in the same area as your are. Rainy Lake Last year but spend a good chunk of time in Dryden. Sled stays outside all winter and have never had a problem starting it, even at -30. My sled is a 07, so it did have the slow cranking problem before. After the ECU recall it fires up right away...

Holy Crap! i cannot believe what a difference 30 minutes of scrubbing can make. In the powder i only gained about 5mph but on the packed stuff its night and day. This is the most snow we have had here for years so it makes me wonder how the phazer MTXs are with a 2inch long track. They must...

I have the clutch back together now. I am going to leave it inside to dry out tonight and tomorrow will put it on after work and go for a ride

It was in A-1. I have AVID drivers, I think stock gearing. I also had a fully loaded sleigh and about 2.5 feet of snow slowing me down last time I was out so I know that will reduce the speed somewhat, but not 30ish miles an hour Last year i never had an issue seeing over 80 on the speedo...

Photos rubber coating worn through. Is it a problem at this point? should I cover it in some paint? Rough looking centre of sheave These little V marks are fisible coming off each of the "fins" of the sheave. They are the exact same around the clutch but want to be sure...

I know dink all about clutches for starters. My sled was topping out at about 50mph but was topping out rpm where it was supposed to be so I took off my secondary to clean it for the first time since I owned the sled. WHAT A MESS! It must be the first time It has been off. There must have...

If i do the same it ends up on the driveway.

2007 FX We have about 3 feet of snow on the lake but I am not getting the top speed the sled got before. I use my sled normally just for fishing but have seen high 80mph on the speedo. yesterday we were out and it was a white out, and i ended up finding some guys who were lost/ended up stuck in...

I got the same one as from CT from a local sled shop for $12 with hardware. At Canadian tire they are 19.99 With just a little massage they will fit the GYTR bumper as well

Holy Crap! I am in fort and just finished taking pics of my sled to post up for sale. I sent you a PM with my number. Come and take a look. It has every issues addressed that came up with the 2007's and also has a pile of mods done. Has hard start done this year, new ball joints, GYTR...

I have never had a sway bar on my sled since I got it. On the lake the sled dosent exactly inspire confidence when cornering about 40mph. Would a sway bar help remedy that? Otherwise how would one adjust the shocks to best fix this? Sorry for the highjack

I have searched and come across a few threads on putting a hitch on a phazer, and the difficulties in it since there isn’t one made. And most of the internet searching hasn’t been overly helpful. But since most of what my sled does is go ice fishing I want to put a actual hitch on instead of...