Recent content by strommin mn

So all these wires are just ground wires? Where would I search for the technical bulletin?

Last ride I encountered an error 81 and flashing engine light. Shut machine down and restart and it goes away for a while. Had to do this a half dozen times in about 10 miles to get home. It actually seemed to bog the machine is how I first noticed the problem. Digging thru the posts lead me to...

Man am I confused. I took another look and it was on it's shortest setting. Sorry bout that.

I just bought an 07 Phazer with a 144". Sled only has 11oo miles and is near perfect but although the steering works perfectly it is very difficult to steer when riding. My 08 Vector steers so much easier. Looking at my Vector there is some slack in the limiter strap. On the Phazer it is real...

Great info. I was not aware of the bearing set screws needing to be loose when putting skid back in. I am at that point now. Thanks so much.

This is a new bearing on both the crank case and the clutch side driveshaft. I have read some posts where members have said they release the set screws on the bearing to the shaft and "pop out" and replace the clutch side driveshaft bearing. Makes me think they are a slip fit and the cap...

Just going through the Yammy before the season as I just picked it up this spring. Noticed the clutch side driveshaft bearing was ball less. Inner and outer race only. So I have replaced the chain case bearing as a precaution and now inserting the clutch side bearing on the shaft and into...