Recent content by weirdo

Thank you for taking time to answer my question but I’m a little confused about a loom.

No head light or tail light. I have replace the head lights, relay, fuse 20amp checked grounds I could only find two. Under the air box to the left. Other is in front bolted to the regulator assembly. Is there other grounds somewhere I’m missing I still have NO head lights

Thx you.

Hello. New to me 03 rx1 the previous owner lost the key and went cutting the wire and installed a button style switch (they cut the connecter off the sled. I’m not good with tracing wires. Could someone explain in simple terms what wire works what on the New key assembly

The light saved me a starter for sure. I did the exact same as mooseman posted. If replacing the relay buy OEM. Not aftermarket

Thx you. I have learned tons of info from this forum. I put a light on the relay and it already paid off by telling me that the starter still has power. Off to the Yamaha dealer to bet OEM relay Monday. Thank you once again

hello. My issue (there’s lots). So new starter, new starter relay. The starter stays running intermittent not all the time but the only way can get it to stop is unhook the ground wire. I’m thinking I have a faulty relay its a aftermarket one?

hello. Installing a new set on stock skis I need the measurement where the 1/2 inch hole at the front of the ski. I’m going from the front hole where the stock runner bolts on. I googled it and the measurements all look like your drilling right at the point where the grab loop Attaches...