Search results

I took my 09 nytro xtx apart to check the fuel injectors as cyl 1 & 2 we’re not getting fuel. Once I took everything off and went through diag mode on the gauge everything started working properly. I put everything back together and when I turned it on I got code 13, 15, 25, and 46. Went back...

Last ride out the xtx was really sluggish in the deep stuff so I decided to tear into the clutches to see what was going on and I did t have to look very hard. Apparently over the summer the primary decided to start to grow a bunion on it so it could shred the Bushing in the outer cover. What is...

Had the xtx out on the weekend and when i tried to fire it up sunday morning to take it home it would not start. I replaced the relays with the red solid state ones last year after the fuel pump relay froze. I could hear the starter solenoid clicking but it wouldn't start. Just wondering if...

i just put a under tunnel exhaust on my xtx and was wondering what bag u guys/gals are running to fill the void under the seat where the stock exhaust used to be.

Looking at putting a clutch kit in my xtx. Who has put the stage 2 kit on their sled and what do you think of it. I need to do something because my sled is not pulling full r's in the powder with the 1.75 BC even with the 19 tooth top gear. If anyone has any other suggestions let hear it. Lol

Over the years what site have you found to be the best to get yamaha parts and accessories from? My local dealer just went through a big "clean up" and hired all new people for,some reason. Needless to say the people they hired do not have any knowledge about what they are trying to help you...

Just lookin for some measurements on the mbrp trail slip on. Depth and length and width if someone has one handy and could grab a few measurements off of it that would be great.

does anyone have a stabilizer bar they have removed and want to get rid of it? I bought a 2010 xtx with mtx front end and no stabilizer bar. is the stabilizer from the xtx and mtx the same?

Hey everyone, i'm getting an ERR 1, coolant temp warning light, diagnosis warning indicator light, low coolant temp indicator light and warning light all on at the same time and the sled dies. wait 2 minutes and the sled will fire back up and go for a bit then it happens again. Right before...

I picked up a 2010 XTX about a month ago. Just wondering how to bypass the tors on it? It is used and the tors is not working so I want to know if the previous owner has bypassed it or if it is acting up. Thanks in advance

We'll I have had my 2010 XTX for just over a month. In 7 attempted outings I have made it just over 100 km. fuel pump relay shut me down once, nagging problem which I finally tracked down to OFT Rollover tether shut me down 5 rides and now once imfigured that out I have been shut down yet...

Hey everyone. I was looking into changing my plugs on my 10 xtx and I'm kinda lost. I just bought it and don't know much about it yet. I am reading as much as I can about it and there seems to be a lot of info to take in. It came with the large trail tank installed on it. Do I need to...

I picked up a 2010 xtx and like the sled so far. The guy that had it before me switched the front end out to an mtx a arms and spindles. I find this set up tippy. Are the xtx front ends more stable than the mtx?

So I was out for a ride this week and my sled started to run weird, power kept cutting in and out. Pulled over and shut things down to take a look. I turned the key and the fuel pump was studdering so I thought it was just the pump relay. Managed to get back to camp and took the relay inside...

I just picked up a 2010 XTX and the clutch has a rattle at idle. The guy I bought it from says this is normal but I'm pretty sure it didn't come from the factory like this. The sled has 4500 miles on it and I am not sure on huge maintenance history on it. I will be pulling the clutch apart...

Hey guys and gals, I'm new to the yamaha world when it comes to sleds. I just picked up a 2010 nytro xtx. I was looking for a medium height windshield and my dealer says that the only one available is from yamaha themself. I'm not really into the logo and the traffics on it. Just wondering if...

i am looking into buying a YAMAHA for the first time and i was wondering if adding the extra length to a RTX is worth the coin or not. I know the XTX is a 144 but i would like to stay as short as possible. any feedback from anyone who has added the 7 inch rail extensions is greatly appreciated.