• We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.

Search results

  1. V

    carburetor pilot/fuel screw adjusting tool

    that's exactly why i was asking before i purchase anything :) they are in a really hard to reach place, by looking at the tool it needed to be more like 80 degrees than 90 to be able to reach .... i also found some of those remote adjusters but they are pretty expensive, like 30$ a pop and i...
  2. V

    carburetor pilot/fuel screw adjusting tool

    looking to get fuel screw adjusting tool that i can use without taking off carb rack off. which one is easier to use? flex or 90 degrees? can anyone recommend one? these are the ones i'm talking about...
  3. V

    05 rx1 hanging idle

    could someone confirm whether 1 turn of fuels screw is 180 or 360 degrees? thanks!
  4. V

    05 rx1 hanging idle

    interesting, also having same problem with rpm's not going down right away, especially when after a ride, plus it would also backfire. i turned fuel screws 2 turns out, and by two turns i mean 2 x 180 degrees turns, not 2 x 360. then i was taking them out I checked and they were all...
  5. V

    driveshaft bearing numbers

    if you want something shipped to you in time i would refrain from doing business with this royal distributing company, its more of royal pain in the butt company, i placed order SPECIFICALLY mentioning that i NEED the part by friday, they contact me at the end of business day and telling me they...
  6. V

    OEM or third party bearings?

    also interested in Timken numbers if possible and places where i can get them, i searched this part yae25rr and only got ebay store, any other places anyone wants to share - don't by shy! :)
  7. V

    OEM or third party bearings?

    spoke with port yamaha - their OEM are Koyo now
  8. V

    OEM or third party bearings?

    interesting, also, is it normal practice to change bearings on both sides? thanks !
  9. V

    OEM or third party bearings?

    so the time has come when both jackshaft and drive shaft bearings (clutch side) have failed on me and i am in front of dilemma, should i go with OEM or third party brand for replacement bearings. given the fact that i had to pull chaincase apart and i would not like to do it again in very...
  10. V

    rx1 plastic type specification

    thank you so much! i already have ABS ordered for other needs, guess i need polypropylene :)))
  11. V

    rx1 plastic type specification

    ok thanks! won't be near the sled for another week, thought of ordering materials ahead so i can do repairs over this weekend! thanks !
  12. V

    rx1 plastic type specification

    does anyone know what are specifications of plastic parts such as hood and side covers are? i would like to use plastic welder to fix few cracks here and there and need to know what to weld with, thanks !
  13. V

    rx1 cylinder order

    ah, so basically you used some kind of t-connector while syncing? i used instructions for building sync tool that didn't include t-connectors and i didn't know i will be running out of fuel in bowls that fast :)
  14. V

    rx1 cylinder order

    yah, totally no disrespect to site but searching is like generator of random numbers, u give it a value and it returns half the data from DB :)
  15. V

    rx1 cylinder order

    can someone please tell me what is cylinder order on 03-04 rx1? also, which are the fuel lines that i need to connect to gasoline source while syncing carbs? sorry, but every time using search here it turns up a lot of un-related posts, is it me or search is just really crappy ? :)
  16. V

    2004 rx1 steering play

    correct! riser, sorry for wrong terminology. what is heim-sp ? i was suspecting 25-26 mysself, and as for 45-46 wouldn't i be able to see play there? also there is a squeal noise that i can't figure where it comes from and if its even related, it was more noticible while going slower when left...
  17. V

    2004 rx1 steering play

    i apologize ahead if i am re-posting :) got this 04 rx1 with steering post extension installed on it already, can't say i'm crazy about it but don't feel like taking it off yet. I am having issue with this sled's steering having too much of a play. when ski's are locked you can turn...
  18. V

    03 rx1 battery size

    not near my sled now and trying to buy battery, who knows exact dimensions of battery ? on yuasa website dimensions are listed as follows Battery Type: YTX20L-BS Voltage: 12 Capacity: 18 Dimensions: 6.875" x 3.4375" x 6.125" Weight: 11.2 lbs. Metric Dimensions: 175mm x 87mm x 155mm...
  19. V

    carburetor cleaner spray

    yah, i've dropped a float pin into intake manifold on my boat engine once, that feeling is not good :))) thank got i got it out
  20. V

    carburetor cleaner spray

    ok, sea foam than it is ! :) sled is running but takes a little effort to start up i am going to replace plugs, and since i got it used last season i've only changed oil and haven't looked at carbs, don't really want to do it in winter but i will take em apart when it warms up


Back
Top