Search results

Hey all, Before I took ownership of this sled, a packrat ate the button nibs off the gauge and I think moisture got in over the years. Tore the gauge apart last night and found that the button mechanism inside moves freely and makes the typical click sound we normally hear. There also...

Hey All, Need new spindles for my Nypex project, it is based off a 2011 Nytro MTX front end. Do the 2008 spindles have the same geometry as the 2009’ + years? Or was the geometry change found in the length and shape of the A-arms? I’m looking at a few used sets, just want to see if...

Hey all, The previous owner of my project sled left the upper ball joint cap screw loose, causing it to roll around and make the hole through the spindle wider, so wide no that no matter how much tension I put on the bolt, it keeps coming loose. This is with red 277 loctite and a mechanical...

Hey all, Just wondeing if anyone has taken a 19T or 16T apart? Went looking on the net, but no microfische or parts list anywhere. Thanks for any help!

Hey all, Just wanted to quickly mention that theres a really good course going on this upcoming weekend in PG. It is geared specifically for snowmobilers and we need a couple more people to make it happen! This is a good time to go, especially when all the snow is hardpack hero snow...

Hey guys, Looking at picking up a backup sled, one is a 2008 and one is a 2010. The 2010 looks like it has a more modern skid with lower approach angle, and the 2008 looks like a derivative of a pro-action skid. Refresh my memory, when did they change the skid and is the new one that much...

Hey all, I know..., 4 stroke side, but I never seem to get good reception on the 2s side, and I know you guys on this side have great ideas, so here goes.. While looking over the sled, I notice the wiring over the gas tank attached to the metal hoop has melted, and only the ground wire...

Hey all, Just some local trail condtions. Brother and I did a northbay loop from Espanola. D110 in espanola region is excellent, freshly groomed, C108D south of sudbury is terrible until long lake, then its good and freshly groomed to the C trail. C trail north to D trail headed to...

Hey guys, Going to be doing a carb job on my buddies sled, but just wanted to test the waters for some ideas. The sled starts and idles fine, been a couple tanks through it so far this season. But consistently through the year, its been behaving worse and worse. It would develop a stumble...

Hey all, got an rpm issue Long story short, before my rpms were low, about 10500 and wideband was richening up all of a sudden at near peak speed and speed would actually drop, so put in a brand new pink secondary spring wrapped at 90 degrees and got 118mph in 2000ft on ice @ just shy of...

Hey all. Theres lots of traffic here so I was hoping someone might pipe in... Me and some buddies were thinking of trailering to near huntsville to ride in some snow (we dont have much locally) and was wondering if there is still meters of snow and how the trails are? We have no idea of...

Hello all, I have a bender exhaust, and once again, its all smashed up. As you can see in the pics, behind the y-pipe, it is flared out and the pipe is enlarged, while at the same time showing ripples from heat. Then further down the pipe, it actually pinches out to a very restrictive...

Hello all Looking at getting an AEM wideband for my N/A Just looking for some suggestions on where to mount the bung on my conventional two pipe exit exhaust? I would like to mount it somewhere out of the way from ice and snow as best as possible. Some ideas of mine were to mount it...

Hey all Did a search and didnt come up with anything, so going to give this a shot... Seen a show the other day where they were dynoing a v8 with both regular plugs and the new e3's, while at the same time measuring co and NOX levels. The results were that the plugs made more power...

Hey all Anyone familiar to the suspension world for sleds has heard of the new fox float II. In a nushell, its way better than the first, it takes stutter bumps much better than before and acts as though it has a piggy back already on it ( as in a regualr float with a piggy back for...

Hey everyone I have struggled with a clutch mis alignment problem causing belt failures for a long time now, since about 700kms on the sled. Last summer at 6998kms, I removed the gas tank to check the donuts on the flexpipes, and noticed that the exhaust sheild was bent, and it looks like...

Hey guys Just thought you might like to see this vid we took a few weeks ago on a pole line. Excuse my cameramans occasional bad language, he was swearing at the fact I almost ran his girlfriend over..., she was standing in my line..., :Rockon: http://ca.youtube.com/watch?v=C-QS2sA2BNA

Okay boys, first code ever, and it left me stranded.... and rode a doo home. After reading about a code 46 in the Nytro side a few days ago, I knew what it instantly was, and thanks to another members description, I instantly turned my arse around and headed home, only to have it crap out...

My sled is ratcheting to an unaccpetable level even with the track piano wire tight and WAYYYY tighter than spec. So im going to get some extroverts, and the only extroverts I can get are weeks away due to being back ordered, and we have tons of snow here! Anyways, I can get a LH sprocket...

I have my rod removed and guys, this is how the mono is soposed to work! No more clunking and weight transfer is like a nytro! But anyways, before removing I checked and several other people removed theirs without having any problems. But the head mechanic at my dealer said that at this...