Search results

I just rec'd my front suspension kit from Mainway. Great product with great customer service. Instructions are clear and written well. I should have ordered the kit for the rear suspension as well. The improvements and tinkering never ends. Jim

Has anyone tried the screw in track studs from iGrip (www.igripstud.com/studs/snowmobile)? It seems to be a good idea for those wanting improved traction on ice without adding a set of conventional studs. This company had a booth at last year's Big East snowmobile show. Looked interesting...

Now that the warm weather is upon us for the next several LONG months, time to prep the SW for next season. I have a 2018 LTX which has been a fantastic sled. I have had no problems but want to head off any reliability issues. Here is the list of reliability improvements I have in progress...

I bought the polished aluminum cap from Arctic Cat and machined the Cat logos off the top. Clean, smoothed polished cap.

What are the other problems area on the Procross suspension?? Now is the time to address all of the items. Thanks.

Craigwsrx, Nice job!!! What thickness metal did you use? I made a similar plate which mounts on the bottom side of the tunnel. I incorporated the hose protectors in the plate. It was a royal pain to mock up and build. When I take the rear skid out for servicing, I'll post a few photos. I...

The BOP protectors do help protect the rubber hoses from direct impact/cuts from ice but they do not protect the tunnel from damage. Another (more likely) failure mode of the rubber hoses is due to a large amount of bending of the tunnel right above the heat exchanger due to impact from large...

I do the drain - flush - refill process to my chaincases after every long ride (1000 miles or longer) during the season. I use wd-40 as the solvent/cleaner. I like to keep the chaincase free of water and metal debris. At the end of every season I open the chaincase for inspection. Been using...

Checked mine yesterday. No rubbing of the wires but I see how it could happen over time. I added a piece of rubber sheet over the plate beneath the wires for peace of mind. We should start a thread which lists all of the items to check and/or upgrade on these sleds. Certainly are a lot of...

The stock oil tank design is a very poor design: the life blood of the engine depends on an RTV silicone seal. This was a major step backwards for reliability compared to the RX1/Apex oil tank. Has any of the aftermark fabricators thought of making a one piece welded aluminum oil tank? 1/8"...

I went with the muffler and performance setup from Excell. Has a nice deep mellow sound, excellent quality assembly. Looking forward to the sound and improved performance next season!! Jim

Excellent news! Glad it worked out for you, glad the dealer did what is right for a customer. I am going to be installing the heavy duty parts as well. Jim

Does anyone have experience with the Hauck easy change oil kit? Connecting a braided steel hose to the oil tank drain port so it can be routes out to a drain pan should work well. Jim

Has anyone else experienced the coolant leak from this hose? Has anyone come up with a design for a cover/protector for this hose? The "off-season" gives us plenty of time to resolve this problem. Jim

I only got to put on 500 miles on my 18 Sidewinder LTX before work once again to over my life but I LOVE the sled. I have only owned and ridden Yamaha sleds since 1990 and every model had some issue(s) that were worked out by the Yamaha community. I found that before every ride my "worry...

The model number for this bearing is a 6009-2RS which is available from a variety of bearing supply houses. You'll want to use a bearing from a quality manufacturer such as SKF since this bearing lives the toughest life of all the bearings in the sled. Don't skim on a cheap bearing (I do not...

I am leaning strongly towards purchasing the stage 1 performance kit from Aaron Excell. His dyno data shows 225 hp with this kit which is plenty for my riding style. I want a bit more performance and a better sounding exhaust. Can anyone share their experience with this kit: power gain...

Can someone who has the Hurricane alignment tool please post instructions or a video on how to use the tool? I'd like to understand how it works before I buy one from Dave. Many Thanks!

Yes, my dealer installed the Yamaha larger rear tunnel bag before I picked up my sled. Just took it off yesterday t clean the sled and found a lot of abrasions to the tunnel paint and in one spot the paint was worn down to the aluminum. Really aggravating to have an OEM product markup the...

3 weeks ago I purchased a 2018 Sidewinder from Scott Brownell of Brownell's Yamaha in upstate NY. I have purchased sleds for the past 40 years from many dealers and he is the best dealer I have purchased from. He was able to get me the sled I wanted (despite a very late start in the season) at...