Bearing Behind Secondary

[SnowBandit]

I have been greasing the bearing behind the secondary every year but now it has close to 9,000 miles so i was thinking of replacing it. Do you just remove the two bolts from the holder and pull the holder and bearing out? Or do I have to take the whole chain case apart?

 

[MrSled]

Become a VIP and we can send you a service manual.

VIP Member Page

 

[MrSled]

You don’t need to pull chain case. Pull the 2 bolts and clips and remove the bearing block. Remove clip, Press out bearing and press in new bearing install same as removed.

 

[SnowBandit]

You don’t need to pull chain case. Pull the 2 bolts and clips and remove the bearing block. Remove clip, Press out bearing and press in new bearing install same as removed.

That is what I thought, but wanted to check before I started pulling things apart.