1. PLEASE READ: If you have problems in logging with your old password, request a new one over Here. If you haven't received a new password from the forum please email your username and password to webmaster@totallyamaha.com. Sorry for the inconvenience.
  2. All hotmail, msn, outlook, live email accounts are not receiving email notifications. The only way to remedy this is to contact your email provider or to set up a secondary account (with gmail or similar) to receive notifications. If you don't have one of the above emails, you may need to add @totallyamaha.com to your safe senders list in order to receive notifications.

Sly dog rubber fitment on pilot ski

Discussion in 'FX Nytro General Talk' started by bluegrass, Oct 2, 2013.

  1. bluegrass

    bluegrass Newbie

    Messages:
    96
    I bought a set of slydog rubbers and put them in my pilot ski wright under the bolt hole there are small tabs that stick up and the rubber rocks back and fourth I put the ski on the sled put the sled on the ground left it of a few days took ski back off and there are indentation where the rubber sets on the tabs so for the ones that have used slydog rubber with pilot ski do you
    Mount it and go are you taking them tabs out so the rubber set flat
  2. Grimm

    Grimm TY 4 Stroke Master

    Messages:
    4,313
    Location:
    Ottawa, Ontario
    I don't understand why you'd be using a Slydog ski rubber to mount a Pilot ski but yeah, cut the small tabs off the ski if the rubber isn't sitting flat.
  3. Grimm

    Grimm TY 4 Stroke Master

    Messages:
    4,313
    Location:
    Ottawa, Ontario
    I now know why you used a Slydog rubber now....because doesn't make a ski rubber for Yamahas.
  4. bluegrass

    bluegrass Newbie

    Messages:
    96
    What have those that have used this set up found to be the trick
  5. pay2play

    pay2play Newbie

    Messages:
    94
    Location:
    Pigeon, Michigan
    Anybody running pilot 6.9s on their XTX? How did you mount them? Yamaha rubbers, Pilot rubbers, others? I'd like to hear from you too. Thanks,
  6. dansranger

    dansranger Pro

    Messages:
    195
    Location:
    Burlington, Wi
    There's an old thread on here in regards to what everyone is running. If I remember they are using old mx doo rubbers.
  7. cannondale27

    cannondale27 Moderator Staff Member Moderator Lifetime VIP Member VIP Member

    Messages:
    6,064
    Location:
    Manitowoc,WI
    Yes old Doo rubbers from the zx chassis. I dont know how the SlyDog rubber thing got started but I tried them also. They do not fit tight enough. ZX rubbers and a bench grinder to make them fit properly is the right way.
  8. pay2play

    pay2play Newbie

    Messages:
    94
    Location:
    Pigeon, Michigan
    Great, thanks for the information. I may run 6.9 Pilots a friend wants to sell me. I'd actually prefer to stick with the Yamaha Mountain skis, but, the mounting hardware is pricey. Besides, I have an almost brand new set of deuce carbides on my renegade pilots that won't be used. :rocks:

Share This Page