Recent content by all_4_stroke

The new mtx does not have sway bars, they switched it out for the floats.

as I understand the nytro's come filled with the 0W30 semi-synthetic yamalube. it is recomended to run this oil for the first interval or "break in" period. once you reach about 500k you can then choose to switch from the yamlube to a full synthetic such as amsoil. Sythetic oil reduces friction...

this is a great idea! hopefully it helps to reduce the amount of double posts relating to the same issue. lets just hope that people will read before they post lol

Under tunnel anything will be a bit quieter. Why not a DIY under tunnel? Hindel makes an 8" shorty muffler that will fit nicely under the tunnel. I've done 3 nytro's and the most expensive part was the muffler you choose. Just heat and bend the header pipe so that you can block off the tunnel...

Maybe faulty or incorrectly installed injectors?

Hindle makes an 8" can. Would imagine that's got the least amount of noise reduction.

I can have exhaust out in 25 mins on a nytro (I've been timed) and not once did I drill rivets. You pull the seat, gas tank, muffler, header clamps, header flange tubes, then slide the header forward and it drops out of the brackets and simply pull out. Now if I can do that all in 25 mins, how...

it seems there are mixed opinions on it, but av gas is always a good option. guaranteed 100+ octane and easy to get if you are near an airport. I know others will probably chime in against using av gas but for the amount of people i know running high boost and no issues, i say its the best...

it also never hurts to install an air/fuel gauge if you can afford it. cheap insurance as far as im concerned.

Both my nytro's were brand new when I got them. From day one I rode em like I stole em! I had 3000k on my 08 without an issue when I totalled it, and my 2010 was loaded on a trailer and off to the mountains the day I got it. Just let them warm up completely before you ride and you won't have an...

heres some pics

Well it seems none of you have done the same thing I have for under tunnel exhaust, so I will enlighten you. This is about the cheapest method ever! First remove seat, stock muffler and all the brackets, and gas tank. Remove header from nytro. Acquire or borrow an oxy acetylene torch. Heat and...

Mike you hit it right on the head! I've ridden with all kinds of sleds, and stuck is stuck! You won't be the fastest on the hill but you will never be the one wrenching on your sled while everyone is waiting patiently. Solid you are on the right track with the 2010, it's a much better platform...

I also forgot to mention that if you can get your hands on a steering post for a nytro rtx it is already a pivot style post. But don't go buy one, they are pricey. Like 200+. But other than that, I still recommend the powermadd set up.

I have the Pentax W90. It's small, lightweight, waterproof, shock proof, and cold proof. It's a 12.1 megapixel camera, takes wicked awesome pics. It is a little over advanced for me, but once you figure out the settings it'll make you a pro photographer. and yes it actually is waterproof. Once...