Recent content by RX1T

I´m also looking for the billet T´s. Let me know if you find them please.

I just wrap it in a towel, works fine for me.

Under the hood, in the front of the nose, perfect place for 1 Liter bottle..

I think i will go with the Jannetty manifold, i dont care if i loose some hp. Unless it´s a huge different ?? I rather loose some hours in the garage :)

I have a Garrett T28R instead of the schwitzer turbo that came with the Mcx kit. But they do have the same flange as well... I tried mcx and cpr, but they are like.... 10 years old. I just dont know if i should go for the nice looking manifold by MrX, or the new header by MrX 2. They...

Whats the difference between a manifold and header? If i´m going to throw my shitty header in the garbage can and pay the big money for a new one, at least i want to make the best choise of it.

Replaced the hose for 2 years ago without lifting the engine. If I remember correctly, I removed the intercooler ... and perhaps the battery holder. Then I could release the clamp on the elbow. Then I removed the plastic piece under the engine and was able to remove the water pipe that...

Well, i did take the hoose from t-stat and hooked it on a 8mm thick pipe in to turbo. Maybe the pipe is to small and the water gets restricted... ?

Is the water in the turbo supposed to boil? Even after just a couple of minutes of idling?

Thanks !

Does anyone have some pics of where to hookup the cooling lines from the turbo? Turbo is frontmount Garrett... Should put a T in the line from the oilcooler and one to the thermostate? Is this right?

Yes, it´s fits. Same T25 flange

Yes, it did connect to the stock exhaust, and was set at 0.5bar from Mcx. I´m running 0.7bar (10psi) now. They used a schwitzer turbo on the frontmounts. Now i have updated to a Garrett T28R, thats the one in the pic.

Yes, last winter i hade a 3-inch pipe straight out beside the tank. Really terrible noicelevel :o| Going to try a tunneldump this season and see how it works. Gonna cut a hole in the chassie and let the pipe exit straight down..