Search results

Hey members I’m trying to install the 141 linkage kit from hygear on my 2015 stxdx. That cam for the rear shock mount doesn’t seem to want to go. Hygear got smart alex with me because I said their YouTube video wasn’t very helpful and the included instructions are not helpful, pictures are very...

Well members it’s that reverse issue again on my 2015 viper! Parked it in the spring and now went to move it and of course the reverse doesn’t work,again. So I checked everything electrical and found the motor wasn’t working,again. Removed the motor and took it apart to find a lot of moisture...

So 2015 machine , I changed out the whole reverse motor and drive to an updated one a couple years ago, worked fine until trying to use it in the fall after the machine sat through the summer. it had nothing dead, bingo. So I found that the plugs or connectors some how had a bit of green inside...

Okay I know it's a tiring issue but I need to know how to test why the reverse isn't coming on at all on my '15 viper. I press the button and there's nothing, when the actuator was screwy the lights used to dim indicating that there was draw but the actuator wasn't engaging. Now it has nothing...

Hello members, firstly I just changed out the dreaded fox float air shock on the rear of my '15 stxdx, wow I wished I did this years ago!! Changed it to a MTX coil over gas from the same year. Okay what I would like to know is from experienced drivers is this , I installed a front or center...

Hello guys', more pieces falling off my vippy! Okay first off that stupid seat heat switch it finally broke off somewhere, now I cannot find it on partfinder only thing I can see is a switch #8JP-H2627-00 but in the diagram it's just some kind of a circle? Another piece that's now hanging is the...

Happy new years fellows. Okay on my 2015 viper sdxtx 141 I want to improve the rear ride, only option is to go with hygears products as they have several options. So who out there has installed there linkage, the reservoir, the linkage and reservoir, or the coil over shock on there sled? I want...

Hey guys' been seriously looking at hygear rear skid update, but which parts do a I go with to give me satisfaction on my sled and riding? My sled is an 2015 STXDX 141" so on there site I can go with a linkage, then I can go with linkage and air reservoir, then I can go with just a air reservoir...

Hello folks last spring I was on the edge with my sled as I did a complete chain case bearing rebuild and brake bearing. As some of us know that when the brake disc is removed the hell begins with getting the brakes to bleed. Well I began my venture again here the other day and tried all the...

Hello members hope you all had a great summer! Would like to actually know from some of you who actually changed over their rear skid fox air shock to a hygear setup? Now what I am asking is do I go with the linkage set up and air bladder or just install the bladder on my original fox shock...

Okay here we go, 2015 viper started it to move to a different location and ran for about 15 minutes,shut down and then wanted to move it now it won’t start! Oil light is on while cranking and when I checked all the relays and fuses I noticed the ISC relay making a quite buzzing sound with the...

Okay I gotta say this that I come to realize while working on my ‘15 viper lately. If you guys noticed that after the first oil change It’s recommended that the engine oil is good to 10,000 kms for a change. Then into the service manual it recommends you service the chain oil and inspect the...

Okay this Viper just keeps going on and on with issues as I am trying to put it back together after that stupid top bearing on the chain case blew apart and created my journey of hardship! Now I need to ask HOW do I get the brake to work again? Firstly I did not replace that little o ring that...

Hey guys' I got into a bind again with this sled again! I had replaced the bearing that's on the brake caliper and a new seal and flange, when I put this together I of course forgot to put the circlip on the shaft ! Ha, so when I had this apart I peened the shaft area where the bearing sits and...

hello members I am gonna finally get my '15 viper chain case together this weekend (parts delay) and I would like to know which torque do I use for the top jackshaft bearing retainer ring, on the one page in my service manual in the torque specs.section it says, top chain case bearing retainer...

Ok just received my chain case and new seals and bearings installed by dealership. If I could load the bloody picture I would, problem I think is that the bottom seal looks like it’s not flush with the housing, I can put a coin between the seal and housing! I am positive that the seal should...

Ok in the tool bag where these 2 washers, where do they go? I probably guess they’re a shim for something but they are to big for the jack shaft! Also one is thinner.

Hello again members of help. On the rear scissor of the viper skid(STXDX) the rear axle that bolts to the tunnel there are 2 so called wave washer that go in between the idler wheel and the axle,#36 in the parts diagram. Okay mine are missing, so what I think they are there for is to allow the...

Im repairing my vipers chain case bearings and would like to know have you guys bought or made your own spanner socket for the top bearing retainer? It’s the lock ring with 4 notches on it to tighten the bearing, plus it cannot be just hammered on as the torque is 35 lbs. So a socket with tabs...

Well today was a frustrating day again working on my '15 viper! Thought I cured the grinding noise by taking apart the brake side bearing and replacing it with a quality one, original was shot dry and almost rusted up. Thought I'd go the easiest route, jackshaft bearing on this side is good...