• We are no longer supporting TapaTalk as a mobile app for our sites. The TapaTalk App has many issues with speed on our server as well as security holes that leave us vulnerable to attacks and spammers.

Search results

  1. G

    any pics on how to gut or the inside of a nytro exhaust

    If you want a gutted muffler for cheap, PM me
  2. G

    Nytro Boost Module for your YamaHeater

    Installed my booster and finally have the heat I need. The original Yamaheater was a big step up, but with the booster it kicks butt. I honestly can say its just right for me. But with controls off, red LED, they get quite hot. Not too hot, but hot enough to be able to reverse cold hands if say...
  3. G

    10 gallon trail tank

    This was the best mod I did to my Nytro. Its easy to pull on and off so no big deal on the plugs. 5k and still have factory plugs.
  4. G

    Heed the warnings boys

    just to note, this also happened on my 08, FYI
  5. G

    What's a good track for a boosted short track Nytro?

    Curious as to what you are running for skis. My 136 Nytro was better in every way including cornering. And the XTX guys aren't complaing either. Could be something else going on here. Also if you have always ridden 121's it may be that. Some of my buds don't like the longer tracks no matter how...
  6. G

    Streched RTX or XTX

    Not disagreeing with any of the above comments, but I stretched my RTX to 136 with a Cobra track, and some shock work from HYGEAR and the sled is light years better. I am not sure if the XTX has transfer rods on the rear skid, but I just haven't had any luck with the transfer rod type skids. YMMV
  7. G

    RTX stereched???

    I stretched my 08 RTX to 136 and it is a better machine all around. No drawbacks, and now I have room for storage on the tunnel. Full of win,,,
  8. G

    Hygear VS. Ohlins

    I have the trail pro(I think!) package among a whole bunch of other mods, and love what Ross did with the revalving. But I don't think the triple rate spring on the fronts are the way to go. They seem to allow the front to roll to much for my liking. The revalve made the ride so much better...
  9. G

    Demo Ride-08 RTX 40th Anny

    I own a 08RTX, it rides incredible, like its on rails, finally to the point where I don't miss my dialed in REV. Great motor, great seating position. All this happiness came at a cost though as I have quite a bit of extra money into the sled to make it right for me. Skis, shock revalves, the...
  10. G

    Upper ball joint cut question??

    before anybody runs out and measures the ball joint, I figured it out when I took one apart. It was easy to tell I had cut these. Now to figure out why when the lowers were replace, a little twitchyness came back,,,things that make you go hmmmmmmmmmm
  11. G

    Upper ball joint cut question??

    Can someone tell me either the dimension of a cut upper or a stock upper ball joint on the 08Nytro. I took my sled to the dealer and they replaced the lowers under the service bulletin and I think they did the uppers too. My old uppers had the 2.5mm cut and I had the sled dialed in perfect. Now...
  12. G

    Filleting the Nytro Muffler, Part 1

    Be willing to bet the gutted four stroke muffler is quieter than the stock two stroke in your avatar,,,,,,,,,,,
  13. G

    Filleting the Nytro Muffler, Part 1

    The Hygear trail package on all four shocks made for a much improved ride, and just about eliminated the ski lift. My clutching is spot on now with the 136" kit, and with the Cobra track hooking up like it does, this sled is a completely different animal,,,
  14. G

    Filleting the Nytro Muffler, Part 1

    Removed the middle pipes as discussed and slightly too loud for my taste, would like to go back to stock. So as posted in the classifieds, now looking for a stock muffler so I don't have to take this all back apart again.
  15. G

    Handlebar Warmer problem solved!

    please count me in for a "kit", thanks
  16. G

    Hygear package review?

    ditto for me, got the shocks all done and installed but won't be riding til the first of the year, will post results then. I hope its good for the money I spent,,,
  17. G

    nytro xtx: 1st ride report

    Did you pick up your sled from Rogers in town? Thanks for the report and can't wait to get up to your neck of the woods.
  18. G

    drive axle bearing,,,

    I was doing a track change, so had a whole bunch of things apart, but I think you can just take that out. There are two set screw on that bearing and they are T20(Torx). You are going to have to reach inside the tunnel to undo them. So yes, I don't thinks its that big a deal, but will be if it...
  19. G

    drive axle bearing,,,

    after lucky 7 post on exhaust donuts failing, heres another must check item. The clutch side bearing on the drive axle looked like hell with just 1900 miles on my 08 RTX. No way they would have made it through this coming season. Sorry for my crappy blackberry pic, but at about the top of the...
  20. G

    Filleting the Nytro Muffler, Part 1

    170 plus, I am from southern Maine, Sanford area. Glad that pic helped you, and if you need any help welding your back together let me know, I have a nice tig setup here at the house. I ride the county quite a bit and hit washburn many times each year, love it up there


Back
Top