kelly mac
Newbie
Help
Have an 09 Nytro. Will start and idle.
As soon as you touch the throttle it stalls.
Codes coming up are 13. 15. And 25
Should I replace the throttle position sensor #25 1st?
Thank you
Have an 09 Nytro. Will start and idle.
As soon as you touch the throttle it stalls.
Codes coming up are 13. 15. And 25
Should I replace the throttle position sensor #25 1st?
Thank you
74Nitro
VIP Member
- Joined
- Feb 18, 2013
- Messages
- 5,228
- Age
- 52
- Location
- Dublin Ontario
- Country
- Canada
- Snowmobile
- 2019 Sidewinder LTX
I doubt it's the sensor given you have three codes.
Could be the circuit connector blocks in the harness, it's fairly common that those give trouble.
Also check for broken wire(s) near the intake air pressure sensor.
Could be the circuit connector blocks in the harness, it's fairly common that those give trouble.
Also check for broken wire(s) near the intake air pressure sensor.
kelly mac
Newbie
Thank you I will check tonightI doubt it's the sensor given you have three codes.
Could be the circuit connector blocks in the harness, it's fairly common that those give trouble.
Also check for broken wire(s) near the intake air pressure sensor.
- Joined
- Apr 13, 2003
- Messages
- 21,317
- Age
- 54
- Location
- Schofield, WI
- Website
- www.totallyamaha.com
- Country
- USA
- Snowmobile
- 2020 Sidewinder SRX
Throttle cable too tight?
Similar threads
- Replies
- 9
- Views
- 2K
- Replies
- 5
- Views
- 1K