Cubby
TY 4 Stroke Guru
- Joined
- Dec 14, 2009
- Messages
- 761
- Location
- South of Winnipeg, Manitoba CANADA
- Country
- Canada
- Snowmobile
- 2015 Ski Doo 900 ACE Renegade Adrenaline
2007 Yamaha Phazer GT
Does anyone know the size of the crankcase oil drain plug? I think its an M10 x 15mm.
I was changing the oil and stripped the hex head trying to loosen it. Strange since I know I torqued it properly last time to 11 ft lbs.
Anyway I want to replace it with one that has a regular bolt head.
Thanks in advance.
I was changing the oil and stripped the hex head trying to loosen it. Strange since I know I torqued it properly last time to 11 ft lbs.
Anyway I want to replace it with one that has a regular bolt head.
Thanks in advance.
Which did you strip the case or Tank?
RAMSOMAIR
TY 4 Stroke God
crankcase oil drain plug from OP
Snowmixer
Pro
- Joined
- Oct 29, 2010
- Messages
- 188
- Location
- Snohomish, Washington
- Country
- USA
- Snowmobile
- 2007 Phazer Mountain Lite
2008 Phazer MTX
2012 Arctic Cat M800 153
Yes, the bolt is a M10 x 1.25mm pitch x 15mm grip/thread length. Luckily I have not stripped one out, but could totally see it happening so I also replaced the socket head bolt with a hex head.
Cubby
TY 4 Stroke Guru
- Joined
- Dec 14, 2009
- Messages
- 761
- Location
- South of Winnipeg, Manitoba CANADA
- Country
- Canada
- Snowmobile
- 2015 Ski Doo 900 ACE Renegade Adrenaline
2007 Yamaha Phazer GT
I did order the OEM Yamaha oil drain bolt. When I picked it up at the local Yamaha dealer they actually found a proper hex head bolt with the exact measurements I needed (M10 x 1.25 s 15.5mm) in a bag of spare parts. No charge! Thanks to Wildwood Yamaha.
