bsevigny
Extreme
- Joined
- Mar 25, 2006
- Messages
- 57
- Location
- Minnesota
- Country
- USA
- Snowmobile
- 2016 Vector XTX 1.75 LE with Elka Shocks
2013 Vector LTX
2016 Polaris Assault with 159 track and 35" front
2009 Polaris RMK 700
I bought and installed Simmons Gen I skis on my 2006 Vector GT. The skis were used off an RX. The used carbides had horrible wear on the front of the carbides and nearly no wear on the back. I put a 3/16" inch shim in the back of the ski mounts.
I installed dual 6" cutting carbides on each ski.
Has anyone else shimmed Simmons skis on a Vector, Rage or RX? Did this fix the darting problem? My OEM skis darted horribly in certain conditions.
Bgs
I installed dual 6" cutting carbides on each ski.
Has anyone else shimmed Simmons skis on a Vector, Rage or RX? Did this fix the darting problem? My OEM skis darted horribly in certain conditions.
Bgs
YamaMikeRTX
Extreme
that seems to be a problem. I removed my sim skis ovr the weekend and they had the same wear in the front. I will shim them when I reinstall.
Tork
TY 4 Stroke God
yeah, the Simmons do seem to require shimming. I found the yamaha rubber stopper to be too soft, so it can compress, then you gotta add more shim 
