powderpimp1
Expert
Does any one know where I can get exact dimentions of the inner and outer front, rear, bogies on 06 models. anything will help!
thanks
thanks
ROCKRTX
TY 4 Stroke Junkie
The 6 small wheels are 130mm the rear wheels are 178mm.
powderpimp1
Expert
How about blue print, or three view of the part? Are there any aftmrk shop sites i could try? Im tryin to make a set with my schools CNC mill.
ROCKRTX
TY 4 Stroke Junkie
Slydog real cool bogies
Try this site http://ulmerracing.com/
Try this site http://ulmerracing.com/
powderpimp1
Expert
thnks, iv seen them there nice. Im lookin to go with billet. Kinda like gade-thrasher did.
ROCKRTX
TY 4 Stroke Junkie
powderpimp1
Expert
sent an email. whats the inner diameter where it slides onto the axle?
ROCKRTX
TY 4 Stroke Junkie
They are 6004 bearing in the rear dimension is 42mmx20mmx12mm
20mm inner
12mm wide
the 6 smaller are 6005 bearing 47mmx25x12
25mm inner
12mm wide
20mm inner
12mm wide
the 6 smaller are 6005 bearing 47mmx25x12
25mm inner
12mm wide
powderpimp1
Expert
thankx this will help a bunch
Tricked-Toys
Extreme
powderpimp1 said:
We have done a bunch of sets for Yamaha's this year.....for the front wheels everyone has asked for the slightly larger ones to reduce hyfax wear.
You can check our stuff out at www.tricked-toys.com
powderpimp1
Expert
iv seen your stuff and i love it. how wide are your wheels?
Tricked-Toys
Extreme
powderpimp1 said:
The thickness of the wheels are 9/16....if you need them to be thinner we can easily do that.
powderpimp1
Expert
does anyone have a old set (front and rear) wheels they could send to me, ill pay the shipping.
