MitchRS
Lifetime Member
Hello everyone,
I went for a good ride yesterday and would get a loud thump if I went 7K or more RPM's, sounded like the track was missing the cogs or something similar so I took it back home. When I got home I noticed that the track was quite loose and then saw that the adjustment nut on the right side has disappeared.
Does anyone happen to know that thread size a pitch the adjuster is? When I looked at it, it seemed like it would be either a M8 or M10 x 1.25 pitch.. I didn't have time to pull the left side off for comparison.
Thanks for any help!
I went for a good ride yesterday and would get a loud thump if I went 7K or more RPM's, sounded like the track was missing the cogs or something similar so I took it back home. When I got home I noticed that the track was quite loose and then saw that the adjustment nut on the right side has disappeared.
Does anyone happen to know that thread size a pitch the adjuster is? When I looked at it, it seemed like it would be either a M8 or M10 x 1.25 pitch.. I didn't have time to pull the left side off for comparison.
Thanks for any help!
Last edited:
74Nitro
VIP Member
- Joined
- Feb 18, 2013
- Messages
- 5,229
- Age
- 52
- Location
- Dublin Ontario
- Country
- Canada
- Snowmobile
- 2019 Sidewinder LTX
10 x 1.25
MitchRS
Lifetime Member
Thank you! Much appreciated10 x 1.25
74Nitro
VIP Member
- Joined
- Feb 18, 2013
- Messages
- 5,229
- Age
- 52
- Location
- Dublin Ontario
- Country
- Canada
- Snowmobile
- 2019 Sidewinder LTX
Nylock alsoThank you! Much appreciated
MitchRS
Lifetime Member
That's what I was planning on using, regular nut would just back out.Nylock also
Similar threads
- Replies
- 1
- Views
- 594