Recent content by asmerch204

I installed one on my '08 VL. Mine wasn't too bad, just had to make sure I only threaded the four bolts a couple of turns each before I torqued anything down. I also noticed that one of the mounts where the bolts thread into was bent up do to an impact. I straightened it with channel locks and...

I installed one on my '08 VL. Mine wasn't too bad, just had to make sure I only threaded the four bolts a couple of turns each before I torqued anything down. I also noticed that one of the mounts where the bolts thread into was bent up do to an impact. I straightened to with channel locks...

I knew I saw one a while back, its listed on the VKPro accessories page part # 86D-77591-00-00. It even looks as though it has the same bolt pattern as our hitches so you could swap rather easily! Bring on the broken doos!

I think they sell one for the VK Pro, maybe that would work.

Great, that will be fun to do outside!! Thanks

I just a similar post in the Phazer section, I guess I'll siphon the gas out and try again.

Its an '08 and I'm pretty sure it has the updated ecu. I remember looking into that when I bought it in February and seeing the updated part number on it. I always run premium in it and also idled it til the fan came on too. I guess I will do the plugs and try again. Depending on the...

Hey guys just wondering if anyone has any ideas as to what is going on here? I went to start the sled yesterday and it wouldn't fire? I started it about once every month or so through out the summer/fall, each time firing and starting great. I had stabilized the fuel and changed oil/filter in...

Ya I usually stabilize the last tank of the year, and use the spray can style to fog the carbs on all the 2 strokes I've had. This being my first 4 stroke and never seeing this liquid style of fogging oil before I wasn't sure if I could put it in the tank as the directions say for outboards...

So the dealership sold me Yamaha EFI Storage Oil the other day, I was wondering if anyone has used it? The instructions state that it is for Yammy outboards and needs to be added to a portable tank then run through. Can I just dump some in my tank (1/4) and run it till it works through? What...

Ya its the Ultra plate from Yamaha. $149.95

Sorry daboog, I didn't install it until about a month ago and by then I forgot to post photos. It fit good no issues and offers a lot more protection than the thin piece of plastic it covers. I don't think it will offer much float but with the 9" ski skins I don't really need much in that...

www.yamahagenuineparts.com/

It happened to me last weekend as well (-34c). Tried a hand warmer on the relays for about 10 min to no avail. Pulled out the thermos, poured hot tea on the relays and the pump fired right away. Even the yammy needs some green tea every now and again!

So I decided to make my money go a little further and I went with the 9" ski skins. I also ordered the ultra plate. Parts should be in this week, hopefully testing her out by Friday. Thanks again, i'll let you know how they work.