Recent content by stook

X2 wondering the exact same thing

I have a pair of pilots that I had on my nytro and want to try them on my viper. What rubbers did you use? Thanx

I ride with ski doo guys and they do this when we fill at the pumps

If you cant find the rapid tac cleaner get a spray bottle and use a mix of alcohol and water , about 30 pwrcent alcohol. Spray the sled and the graphic position the graphic where you want it then start trowling from the middle and work your way out to one side then the other.

I ran the 4 inch slim jims woodies doolies in the middle and 4 inch on the outside works great for me

I have pilots on my xtx amd run the woody's dollies. It eliminated the darting

At the dealer

Grizz is right My 2013 xtx didnt come with the latest relay . The one I put in is red.

Oh ya the fuel pump relay too

Dupont sliders, mountain tech skid plate, block off plate to help with the tunnel icing, dual carbides for the skis or tuners then ride it.

I have the peel and stick type . Ill clean it with thinner then stick it on

Hey guys I'm installing an oil pan heater for those really cold morn. Just wondering should I put it on the oil tank or the oil pan? Or does it matter.

You can buy a frogskin that fits over the vent has the glue around the outside edge. I did mine two years ago and its still on there just stuck it on the outside, make sure its clean wipe with alcohol before sticking it on should be good. Cheap and easy

If the dolly under the track is too far back it will make the suspension sag also

Thanks for the reply