Search results

Definitely not your fault, well now I know I made it work by putting it on its side, definitely will be easier next time

I assume those are more reasonably priced because they are expensive

Just put a new track on a 1.6 Camoplast. What I cant figure out is why there is not a fill or drain hole in the chain case. Yamaha really thinks its a good idea to have to turn the sled on its side to fill the reservoir, and then try not to drop the screws and reattach the face plate with my...

Upgrading the trailer, looking for some opinions. I have a 2006 Rance Renegade drive on and off, the ramp is fairly steep anybody install these on their trailer. Thanks for any info.

Thanks I didn't even think about the tunnel protector.

Looking at the Back Country X2

Looking to get a deeper snow track (2") for my LTX SE any suggestions. Thanks in advance.

Was the easiest thing I have done. Thanks.

Thanks again Cannondale27.

I received the harness from BOP with the fuse box relocate kit. I will have to look at it thanks for the info

I forget what I removed when I did the reversal. Or do I just disconnect the modual and plug the male female back together?

I just wanted to let all know that are apart of this awesome blog Thank You. With your help I have saved a ton of cash that now can be spent supporting local business while out on the trail. Fuse box relocate kit, upgraded 4th wheel kit, installation of Skid Plate, new plugs, oil change...

Thanks for the info though

Unfortunately not. My closest guy is 30 miles away Rich's Yamaha when I asked his lead Mechanic a question about a wrench for the oil filter he was less than helpful. So I assume he will be even less when I ask him to borrow the puller

Thanks I knew I saw it on here was just searching the wrong thread. It is an SOB to get those off.

I cannot get this wheel off to put on my new springs any suggestions. Thanks.

TD I also have a skid plate do you know if Ulmer has them in stock.

What are you guys doing with the dummy side of the adapter for the heated shield plug?

NGK CR9E

Got the new plugs from Dennis Kirk they where stated exact match but where not. The top side that sits in the ignition coil is a little bit longer so it will not seat properly.