Jbird90
Newbie
- Joined
- Dec 18, 2015
- Messages
- 20
- Age
- 45
- Location
- Washington, MI
- Country
- USA
- Snowmobile
- 2009 Nytro XTX
I want to adjust my brake handle down, or rotate it forward slightly.
Not a lot but I prefer it to be lower than it is....but how do I loosen the hardware so I can rotate it? I haven't loosened anything yet but don't wanna loosen the wrong screws.
Sent from my LG-D850 using Tapatalk
Not a lot but I prefer it to be lower than it is....but how do I loosen the hardware so I can rotate it? I haven't loosened anything yet but don't wanna loosen the wrong screws.
Sent from my LG-D850 using Tapatalk
Sevey
TY 4 Stroke God
- Joined
- Feb 15, 2011
- Messages
- 1,742
- Location
- Collingwood, ON
- Website
- www.ty4stroke.com
- Country
- Canada
- Snowmobile
- 2018 Sidewinder RTX
It's pretty straight forward. I believe it's an Allen key type bolt that you loosen, rotate the assembly and re tighten.
Ms
Ms
Deeppow16
TY 4 Stroke Master
- Joined
- Oct 19, 2015
- Messages
- 1,159
- Age
- 29
- Location
- Montrose, Minnesota
- Country
- USA
- Snowmobile
- 2016 Arctic Cat M8000
2009 Yamaha Nytro MTX (Totaled)
2002 Polaris 600 XCSP (Sold)
1999 Ski-doo Formula 500 (Totaled)
Yup allen type wrench and its two bolts. I know this because mine came lose and my break handle moved and when I went to stop I ran right into my buddies sled. I was not happy and neither was he but no damage. lock tite and torched those suckers down.
Jbird90
Newbie
- Joined
- Dec 18, 2015
- Messages
- 20
- Age
- 45
- Location
- Washington, MI
- Country
- USA
- Snowmobile
- 2009 Nytro XTX
I dont have any allens on mine. Two Phillips head screws on bottoms. Do I need to take the plastic piece with the handlebar thumb warmer switch of
Sent from my LG-D850 using Tapatalk
Sent from my LG-D850 using Tapatalk
Similar threads
- Replies
- 7
- Views
- 1K
- Replies
- 1
- Views
- 592