1975FA
Expert
My 08 rtx is blowing ignition fuses. I suspect I have a spot in my wiring harness worn bare. Is there any common suspect areas to look first. I have read about this issue on this forum. Thought I'd post this while I'm waiting for my buddy to comeand haul the sled and me home.
- Joined
- Apr 13, 2003
- Messages
- 21,323
- Age
- 54
- Location
- Schofield, WI
- Website
- www.totallyamaha.com
- Country
- USA
- Snowmobile
- 2020 Sidewinder SRX
Follow the harness over the tank, I have had rubs thru under the bar riser as the harness goes over the tank area.
1975FA
Expert
Ok, I found it right under the handle bars. There is a metal edge that cut into 2 wires of the harness. I'm going to do some solder and heat shrink tubing in the morning. The trail tank puts a lot of pressure on the harness. Thanks for the quick response.Follow the harness over the tank, I have had rubs thru under the bar riser as the harness goes over the tank area.
- Joined
- Apr 13, 2003
- Messages
- 21,323
- Age
- 54
- Location
- Schofield, WI
- Website
- www.totallyamaha.com
- Country
- USA
- Snowmobile
- 2020 Sidewinder SRX
Ok, I found it right under the handle bars. There is a metal edge that cut into 2 wires of the harness. I'm going to do some solder and heat shrink tubing in the morning. The trail tank puts a lot of pressure on the harness. Thanks for the quick response.
Good job!!
Similar threads
- Replies
- 19
- Views
- 2K
- Replies
- 5
- Views
- 2K
- Replies
- 13
- Views
- 2K