Surestick
Extreme
- Joined
- Jan 19, 2015
- Messages
- 91
- Age
- 48
- Country
- Canada
- Snowmobile
- '07 Phazer Mountain Lite
With the Canadian dollar as it is right now shopping online from US stores is prohibitively expensive.
I need a couple of Mikuni VM34 rebuild kits which I can get from Mfg Supply but they'll be expensive.
I can't seem to find a Canadian online dealer that sells them. I've looked at all of the sled & motorcycle places I can find with no luck.
Any suggestions?
I need a couple of Mikuni VM34 rebuild kits which I can get from Mfg Supply but they'll be expensive.
I can't seem to find a Canadian online dealer that sells them. I've looked at all of the sled & motorcycle places I can find with no luck.
Any suggestions?
engineman
Extreme
- Joined
- Feb 19, 2013
- Messages
- 88
- Location
- Between Hastings & Redwing MN
- Country
- USA
- Snowmobile
- 2009 Apex LTX, 2010 Vector LTX GT, 1996 Indy 500 SKS
Maybe these guys if you haven't checked them out:
http://www.siriusconinc.com/
I have used them for MC carb parts in the past - not OEM but seemed to work OK.
YMMV....
Steve
http://www.siriusconinc.com/
I have used them for MC carb parts in the past - not OEM but seemed to work OK.
YMMV....
Steve
Pstn head
TY 4 Stroke Master
Not sure but maybe Royal Distributing
Surestick
Extreme
- Joined
- Jan 19, 2015
- Messages
- 91
- Age
- 48
- Country
- Canada
- Snowmobile
- '07 Phazer Mountain Lite
Maybe these guys if you haven't checked them out:
http://www.siriusconinc.com/
I have used them for MC carb parts in the past - not OEM but seemed to work OK.
YMMV....
Steve
I bookmarked the site since it's a good one but no joy on the rebuild kits. :-(
Surestick
Extreme
- Joined
- Jan 19, 2015
- Messages
- 91
- Age
- 48
- Country
- Canada
- Snowmobile
- '07 Phazer Mountain Lite
Not sure but maybe Royal Distributing
I can get carb boots and a fuel pump rebuild kit from them as well as jets but no gaskets or anything for the carb.
Surestick
Extreme
- Joined
- Jan 19, 2015
- Messages
- 91
- Age
- 48
- Country
- Canada
- Snowmobile
- '07 Phazer Mountain Lite
Thanks guys!
Looks like http://www.winnerscirclecanada.com/ and http://www.motovan.com/ sell the parts I will need, not as a kit but individually which is better than nothing.
Kimpex is such a tease, they have what you need/want in their catalogue but don't sell direct and there's generally no way to know if a dealer near you has what you need in stock.
My Google-fu was weak for a while there.
Looks like http://www.winnerscirclecanada.com/ and http://www.motovan.com/ sell the parts I will need, not as a kit but individually which is better than nothing.
Kimpex is such a tease, they have what you need/want in their catalogue but don't sell direct and there's generally no way to know if a dealer near you has what you need in stock.
My Google-fu was weak for a while there.
Last edited:
Decepticon Blackout
Newbie
- Joined
- Nov 12, 2015
- Messages
- 23
- Age
- 53
- Location
- Port Hope Ontario
- Country
- Canada
- Snowmobile
- 2021 - Current: 2009 XTX
Hindle Slip On PCV
w Hurricane Hindle Map
*2016-2018
2010 RTX SE
Full Hindle Hurricane Kit / PC5
Hurricane Clutch kit - 1.5
- LOCATION
- Rice Lake Ontario Canada
Make sure the parts are Mikuni, not Chinese rip off clone stuff.
A neighbour came over with his old Thundercat and wondered
why it was pig rich all the way from mid to full. His "got these on
eBay dirt cheap" needle jets/jet needles/mains" were 4 sizes too
big. This clone stuff is making its way everywhere now. Just an FYI.
Oem Mikuni has the sizing numbers scribed on the sides
A neighbour came over with his old Thundercat and wondered
why it was pig rich all the way from mid to full. His "got these on
eBay dirt cheap" needle jets/jet needles/mains" were 4 sizes too
big. This clone stuff is making its way everywhere now. Just an FYI.
Oem Mikuni has the sizing numbers scribed on the sides
Surestick
Extreme
- Joined
- Jan 19, 2015
- Messages
- 91
- Age
- 48
- Country
- Canada
- Snowmobile
- '07 Phazer Mountain Lite
Make sure the parts are Mikuni, not Chinese rip off clone stuff.
A neighbour came over with his old Thundercat and wondered
why it was pig rich all the way from mid to full. His "got these on
eBay dirt cheap" needle jets/jet needles/mains" were 4 sizes too
big. This clone stuff is making its way everywhere now. Just an FYI.
Oem Mikuni has the sizing numbers scribed on the sides
I ended up getting the gaskets from mfgsupply. The price wasn't bad (so even with the exchange it didn't break the bank) and shipping wasn't a killer either (I think I paid a bit over $5 US shipping for two carb gasket sets and a full engine gasket set), they shipped USPS, not UPS which is a big plus (none of those stupid "brokerage" fees that UPS steals from you when they ship cross-border (don't get me started on UPS...).
The gaskets are all Winderosa brand which seems to have a so-so reputation.
Tyloooor
TY 4 Stroke Junkie
http://importationsthibault.com/itl/home.jspx maybe these guys
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.