RtxViper
Expert
Can someone post a detailed instructions on how to properly adjust the valve? I followed some steps from a motorcycle which i assume is the same but i am not sure if its totally correct I have 3k on my xtx and am getting mopped on the lake by a brand new 12 se. I replaced my belt and adjusted exup valve its a little better but not anywhere near the 12. Just want to try and eliminate things to get it back to running the way it should Thanks in advance
IH8CROWS
Expert
Its in the service manual.
It can be downloaded if you look in the next page or two someone was asking for manual and the link was posted.
It can be downloaded if you look in the next page or two someone was asking for manual and the link was posted.
kviper
VIP Member
The valve should be in check (home position) with key on. Drill bit should go through hole and align with hole in pulley that the cables wrap around. You can rotate the valve with the key off than turn the key on and it should return to home position and you can start it up and watch it move when you stab the throttle. There is a procedure using the dash pod to check function also.
thunderbolt
Expert
A procedure using the dash pod ? really is this in the owners manual or can you explain . Thanks
ecopter
TY 4 Stroke Guru
Search function
ecopter
TY 4 Stroke Guru
yamahahaapex
TY 4 Stroke Master
still waiting for that to be added to the faq. i went and printed them for my garage in the meantime
RtxViper
Expert
yamahahaapex said:still waiting for that to be added to the faq. i went and printed them for my garage in the meantime
I Agree!
I read your post on adjusting the exup valve from ecopter above. I got mine adjusted to 54, 181,0 so I am hoping my power is back to where it should be. Its my last trip of the year and im hoping its fixed
yamahahaapex
TY 4 Stroke Master
Absolutely, seeing as how i went to our dealership, threw it in diag mode and simply recorded the numbers of what was seen on a new machine can tell you pretty quickly if the motor is mis-aligned by even a hair. To be honest i havent done it in 2000kms so im interested to see whats changed since then.
yamahahaapex
TY 4 Stroke Master
RtxViper said:yamahahaapex said:still waiting for that to be added to the faq. i went and printed them for my garage in the meantime
I Agree!
I read your post on adjusting the exup valve from ecopter above. I got mine adjusted to 54, 181,0 so I am hoping my power is back to where it should be. Its my last trip of the year and im hoping its fixed
Let us know how you made out
RtxViper
Expert
Hauls the mail now! Could tell immediately it starts better and the power seems fully restored! Walked away from my buddies brand new etec couldn't have done that before. Now the sled consistently tachs at 10700. Thanks for the help it feels like a brand new sled!
Similar threads
- Replies
- 2
- Views
- 1K
- Replies
- 5
- Views
- 2K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.