Justinthemnytro
Extreme
- Joined
- Dec 19, 2013
- Messages
- 53
- Age
- 33
- Location
- Fort Kent maine
- Country
- USA
- Snowmobile
- 2016 Polaris iqr 600
2013 nytro mtx 153 supercharged 180.
2012 yamaha nytro xtx (burned)
2009 polaris iqr 600(burned)
i want to put a 2 inch track on my nytro and 8 tooth wall bro drivers what kind of gearing do I have to do switching to 8 tooth drivers and is there any other mods I have to do to pull this off other than taking out the tunnel protectors?
TheKoning
Extreme
i recently changed my track to the 1.75 bc. While doing it i put on a 19/39 top gear, changed drive axle bearing(clutch side), fixed limiter straps, and greased all the skid nipples. If i were you id do the same. The smaller top gear will make for better acceleration but lowers top end speed. which doesnt really matter since it'll still be like 150km/h and your off trail riding anyway.
Justinthemnytro
Extreme
- Joined
- Dec 19, 2013
- Messages
- 53
- Age
- 33
- Location
- Fort Kent maine
- Country
- USA
- Snowmobile
- 2016 Polaris iqr 600
2013 nytro mtx 153 supercharged 180.
2012 yamaha nytro xtx (burned)
2009 polaris iqr 600(burned)
Do you still have 9 tooth drivers? And what happened to your limiter straps I broke one awhile back not sure why.
TheKoning
Extreme
Ya i have the stock drivers still, i guess thats the 9 tooth ones. One of my limiter straps snapped so just replaced it.
mnman309
Expert
I have a set of Wahl 8t extroverts mounted on a shaft from an 08 i can sell you.
Justinthemnytro
Extreme
- Joined
- Dec 19, 2013
- Messages
- 53
- Age
- 33
- Location
- Fort Kent maine
- Country
- USA
- Snowmobile
- 2016 Polaris iqr 600
2013 nytro mtx 153 supercharged 180.
2012 yamaha nytro xtx (burned)
2009 polaris iqr 600(burned)
The 08 shaft is not the same size as the 12 but thanks.
tdog1225
Veteran
I did what u r wanting to do. I did the 2" track and went with 8 tooth drivers. I already had a clutch from Ulmer so he swapped me for a diff helix. He told me that by drooping a tooth I did not need to regear cause the smaller drivers do it automatically. In a week I will know how it does when I hit Albany, Wy
Justinthemnytro
Extreme
- Joined
- Dec 19, 2013
- Messages
- 53
- Age
- 33
- Location
- Fort Kent maine
- Country
- USA
- Snowmobile
- 2016 Polaris iqr 600
2013 nytro mtx 153 supercharged 180.
2012 yamaha nytro xtx (burned)
2009 polaris iqr 600(burned)
Thanks I decided to just go with a 1.75 and keep the 9t drivers like thekoning did.
Justinthemnytro
Extreme
- Joined
- Dec 19, 2013
- Messages
- 53
- Age
- 33
- Location
- Fort Kent maine
- Country
- USA
- Snowmobile
- 2016 Polaris iqr 600
2013 nytro mtx 153 supercharged 180.
2012 yamaha nytro xtx (burned)
2009 polaris iqr 600(burned)
What kind of clutch kit do you have or you still have the stock clutch ?i recently changed my track to the 1.75 bc. While doing it i put on a 19/39 top gear, changed drive axle bearing(clutch side), fixed limiter straps, and greased all the skid nipples. If i were you id do the same. The smaller top gear will make for better acceleration but lowers top end speed. which doesnt really matter since it'll still be like 150km/h and your off trail riding anyway.
TheKoning
Extreme
Im stock, interested in a kit tho. never felt a need to get oneWhat kind of clutch kit do you have or you still have the stock clutch ?
NytroMisfit
Expert
- Joined
- Feb 18, 2015
- Messages
- 270
- Age
- 34
- Location
- Levant, Maine
- Country
- USA
- Snowmobile
- 2009 nytro xtx
is the shaft the same size between 08 and 09 xtx's?I have a set of Wahl 8t extroverts mounted on a shaft from an 08 i can sell you.
Similar threads
- Replies
- 2
- Views
- 233
- Replies
- 4
- Views
- 2K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.