phazer gearing and RPM question?

[jimmyhighway]

What is the stock gear ratio of the 07 phazer base model? Also what RPM does it make peak HP? I am bouncing off the rev limiter at WOT reading 84MPH max on the speedo.

 

[NKSALES]

should be 19 41

 

[phazerkid]

the peak HP should be around 11500 if im not mistaken.

 

[cannondale27]

11,500-11,600 is what Ulmer clutches them to.I have noticed every belt I have has been different.Makes things difficult.

 

[jimmyhighway]

yes I was seeing 12+ RPM, after further investigation, the belt was slipping near top of primary. Not shifting all the way out either. Is there a hole to increase tip weight on the stock ramps? Have not looked at the weights yet. I would like to see this thing shift a little harder at the top. It has the power but falls on its face at 65MPH and slowly creeps to 80+. 18/41 gearing is lots of fun!