RX1 timing mark

[Helgy]

When I put my cams back in, which timing mark do I use? In the manual and MCX manual, it shows a single timing mark - my engine has 3, they look like this on the flywheel l----l l Im confused. Also, there is reference to #4 piston, Im assuming that it is the one farthest from the cam chain.....?

 

[gouldsjett1]

Use the single mark that is not connected by the horizontal line. #4 cylinder is on your mag side. Make sure your dots on your cams line up with the marks on the cam covers and you're good to go.

 

[Helgy]

Thanks for the help!

What jets should I run, mcx 240 from sea level to 6000 ft?