APEXRICH
Newbie
- Joined
- Apr 5, 2016
- Messages
- 18
- Age
- 48
- Location
- NOVA SCOTIA
- Country
- Canada
- Snowmobile
- 2006 APEX RTX
2011 APEX XTX
Hey guys, I hate to bring this up again. What is the heavier Ski Doo spring you replace the OEM front rear suspension spring with when you put the Star Suspension in? I have a 2011 Apex XTX.
Teamblue4
Lifetime Member
- Joined
- Feb 20, 2008
- Messages
- 1,278
- Location
- Il.
- Country
- USA
- Snowmobile
- 2012 Apex XTX
2013 Apex SE
2014 Apex SE
2014 Apex XTX
Hygear dual rate spring is the way to go!
Caveman
VIP Member
- Joined
- Sep 13, 2012
- Messages
- 167
- Location
- New Hampshire
- Country
- USA
- Snowmobile
- Yamaha, Polaris, SkiDoo.
You can use this BRP spring, part # 503192217. Inside diameter is a little bigger but it gets the job done.
twyztid
VIP Member
- Joined
- Feb 14, 2011
- Messages
- 861
- Location
- Middleville, MI
- Country
- USA
- Snowmobile
- 2017 Sidewinder LTX SE - TD Power Trail, CAI, 3" Super Quiet
2012 RS Vector
2006 Apex GT
- LOCATION
- Middleville, MI
I bought one of the 150-lb springs from Star Suspension with their full kit about a month ago. The spring that was sent is a Ski-Doo 503195913.
APEXRICH
Newbie
- Joined
- Apr 5, 2016
- Messages
- 18
- Age
- 48
- Location
- NOVA SCOTIA
- Country
- Canada
- Snowmobile
- 2006 APEX RTX
2011 APEX XTX
When you say "150-lb spring" Is that how much you weigh or is this just a standard spring? I weigh around 200lbs.
twyztid
VIP Member
- Joined
- Feb 14, 2011
- Messages
- 861
- Location
- Middleville, MI
- Country
- USA
- Snowmobile
- 2017 Sidewinder LTX SE - TD Power Trail, CAI, 3" Super Quiet
2012 RS Vector
2006 Apex GT
- LOCATION
- Middleville, MI
That means that the spring rate is 150 lbs per inch when compressed.
