Recent content by mcfly

Will a lower A arm from a 2008 Nytro RTX fit on a 2009 Nytro XTX? I destroyed the lower a arm due to the dreaded ball joint and found a used one but I am unsure if it fits. Any knowledge would be appreciated.

Thanks guys. Just thought it was time for a change. I did contemplate the Viper but just thought it was time to head back to a 2 stroke seeing Yamaha didn't and hasn't come out with anything that has quite caught my interest. And I dont know if I would consider any sled out there right now...

I had Hygear revalve and rebuild my shocks this year. They lasted for roughly 700 miles. The keeper on the front shock spring got destroyed within 500 miles. They sent me new ones. Then went out after I fixed the front shock and blew the canister out of the rear shock. Literally looked like...

Technically....I'm still here ;)! I will without a doubt always have a Yammi 4 stroke in the stable

Thanks guys. I know the deal with the Isolfelx and all that good stuff. I got the XRS because of the extra support that the chassis provides. Going to the dealer tomorrow and getting her done..

and Ill still hang around but my 09 XTX is gonna be a backup sled in 2015. I have 6500 miles on it and the only issues it ever gave me was the rear suspension. I will be giving Doo a try for 2015 and going with an 800 XRS. With a 4 year warranty, its hard not to give it a try. Just looking...

email address is srucountryboy@aol.com Thanks a ton man! Just hoping to get an idea of how difficult this might actually be. I would love to have the extra 45 ponies on tap

I am looking at the MPI 180 for my Nytro. I ride all trails in NY/Tug Hill area. I am hoping to get my Nytro to turn into a wheelie/awesome corner to corner machine. I have looked at the turbo's as well but in NY i have to stick with a stock exhaust or I will be getting fines and tickets for...

These look decent. Any one else got pictures of them installed? I'm guessing you have to cut out the bolt heads and reflectors yourself correct?

Just got mine and installed them yesterday. Nice and tight now.....thanks Crew!

I stand corrected then. That damn announcer was a d-bag then and didnt know what the hell he was talking about. I swear on my life he said 660' but glad someone cleared it up. Sorry bout the misinformation

I was also there. I am pretty sure that 118 MPH was in 660'. The prepped Cat was pushing 330 horses on the dyno. Correct me if I am wrong. Out of all the sleds the most impressive....the Vector. Beat the F1100 NA by 10 seconds.

Curve

Saw or press them out. I had to cut the old plastic bushing out with a hacksaw blade. Hopefully I dont need to replace these anytime soon because I'm sure they will be a bear to get out. Pressing them out would even be a chore.

Just installed the Ulmers Kit this past weekend. I just pulled the plastics, removed the shocks, disconnected ball joints, and removed a arms. The new bushings are a very very tight fit. If you dont have one, you should look at using a press to install them. Thats what I did and all went...