Recent content by Trailblazergt

Hi everyone, I hope someone could give me some ideas cause I'm fresh out of them now. I got a 2008 Apex LTX GT that I put 40 k on and then lost compression in 2 cylinders, upon removing the head I found the exhaust valves had burned out, so I decided to take it a little further and took the...

Why did you change the drivers, Just curious if there was an advantage to that, I recently swapping my track for the same track but a 144" length from Tracks USA using stock pitch drivers and extended the tunnel and custom made rails to accommodate the same monoshock suspension. JG

Snowmobiling is always an adventure

Snowmobile

Looking to purchase a 2016 SR Viper X-TX, been on a Apex LTX GT since '08, love to ride....ran up the odometer to 32000 Klms and running, would like to know if anyone has done some milage close to that or more on the Viper and what kind've maintenance issues have ya ran into?

Dumb question here but I have to ask and maybe others are wondering but to shy too, after reviewing your post on how to adjust the CO, I noticed the connector that i should be grounding (on the left side of the delta box) is under the air box, so for each time I want/need to adjust i will need...

Thanks JRock

So in an effect no danger of leaning out regardless of temperature and WOT, this adjustment is strictly for start up and idling? I read guys were getting better fuel range with this adjustment, wondering how this adjustment would work that way if it was for startup and idle. Sorry for...

Thanks for all the info on the CO settings guys but....putting aside Black Knights last post i would like to know a little more about what the outside temperatures verses the CO settings you guys have set too and ride too. Has any one had the courage to ride WOT with like -10 CO settings and...

Try a set of Dupont slides..... not so sure if they'll fit your set up but they are really wear resistant, expensive too but worth the purchase to save the head aches.

Thanks for the quick reply Fabio

Wow this is the first I've seen this topic and it describes to a T what I am experiencing with my sled for the last couple years, never knew what it was but once she got about a half hour into a ride it would not stall at stop signs anymore, I guess I got used to it and learned to ride with it...

Update on my sled build, I made a set of 144 rails from aluminum flat bar on the cnc, I made them tipped up in the rear like the XTX's, tip up goes back 11 1/2 inches. I added a tunnel extension, side mounts for spare gas containers and a rear rack for additional storage. I got 4000klms on the...

Great job on that truck willyswagon

One word for your slider issue....Duponts