Search results

I have 2016 LTX with MPI 180 kit. I have D&D can and Air intake outside. I have stock helix at 70 degrees with Pink Spring. Magnaforce weights loaded 2-0-1-1 (2 is tip). I also run the BoP Soft Spring. After 80 miles Dec 20th on Tug Hill clutches look good. When nailing throttle or...

Anyone hear any news regarding Yamaha proactively recalling the 2016 Vipers to replace rods? I managed 600 miles with the 180 kit last year, but felt every ride out might be my last. I have so much money tied up in the sled now I may just bite the bullet and have stronger rods put in now...

Low Boost MPI Kit: Assuming the kit is calibrated for sea level at 4.5 PSI what would one expect to see at 1000, 2000? I was just running at 2210 ft and seemed to be at least 5 psi, No EBAC so this is just what the waste gate is set at. thanks

I just sent my EBAC in for replacement/reprogram (2016 180 Kit). I have reviewed MPIs bypass procedures but am confused. Since only the black box needs to be sent back I left the bypass valve connected to sled. I have re-connected the GEMS to the Map Sensor. Can the sled be run like this...

Just replaced my 2005 Classic with a 2016 NEO NAS2275TR. 22'x7.5' wide. The silver matches the truck nicely . Went with Orange since I sometime trailer the Harleys out of town also. My last trailer was known to all my friends as "big bird".....what will they call this one?

Took this at CNY Power Sports this morning.....sweet ride

Well Back to Yamaha after switching brands in 2010. I spring ordered the LTX-SE (blue) with Turbo. Does anyone have any insight into the Yamaha $600 Parts and Accessories? While the sled is having Turbo installed I want to have dealer install 21/41 gears w/chain. I’d like to use part of my...

Pls help Need to know generally what classes the following 4 strokes sleds should be catogorized with: RX1 / Apex FX Nitro Vecor AC Jaguar SD 1200 XR 4Tec FST Polaris Local Drags Races in Marathon NY Feb 7th Thanks Folks Darren

Anyone have experience with Kimpec tomahawk track. My buddy is looking to replace track on his Skippy Doo (sorry couldnt resist). And found good deal for 1.25 inch. thanks in advance

Been waiting all season to run the Mighty Mach...got lots of chances this week.....are you ready? I debated writing this but could resist. The Sleds: Mine 06' Attak, Proline Clutching, 162 trail Carbides center only, stock 1.25" track, Plugs. 2000 miles. Track...

Finally shot some pics of my ride. Also happy to report 03' Firecat not a problem in 800' feet!!!

Anyone have any experience with colored LEDs? Thinking about added some more color to the Attak. thanks in advance. D

Do the 2006's use same skid plate as RX1 chassie? If so anyone got a blue or silver they wanna sell. thanks

Awaiting my Attack and starting to consider what mods I'm going to do first. I am considering having the track punched and clipped and installing new drivers. Would like to hear pros and cons from those that have made the change. One on the most frustrating things about the RX1 was having...

Supertuner. Just installed your Kit, looks great! Have yet to sync carbs, but ran it anyway. Unit Idles fine, revs perfect. So I took it for spin. I notice burble at 5000-6000 rpms, and what seems like a bog on the top side. Assuming I sync carbs and still have issues, any...

I just purchased an enclosed 3 place in-line trailer and looking for lessons learned outfitting. I was hoping someone had experience on which ski guides work best and the best mounting location. I loaded three sleds in yesterday for 1st time and it appears that guides would be useful on...

Help, doing track swap on 03' RX1 ER (reverse). Got almost everything back together.....but can't get reverse hooked up. Can't get the lever attached to the chain case to engage the large reverse bottom gear. There has to be a trick on getting those pins behind the gear flange. Thanks in...

Found 3-4 small steel "balls" (less than 1/4" diameter) on my garage floor...can't for the life of me figure out where they came from. Does the RX1 use any bearings that might contain these? I've looked it over, and it runs fine. Thoughts

#1 Have 11mm bar and longer links. Was considering changing to straight rate springs as well. Spoke to Pioneer to discuss there 2.3 kg/mm springs, they indicated that these would "stiffen" the ride. Just wondering if 2.1 or even 1.9 would be better choice for better ride. thanks D