attakbologna
Veteran
- Joined
- Jul 21, 2011
- Messages
- 33
- Age
- 47
- Country
- Canada
- Snowmobile
- 2006 Yamaha Attak
cnybrian
Lifetime Member
- Joined
- Oct 6, 2011
- Messages
- 476
- Age
- 52
- Location
- Cato, NY
- Country
- USA
- Snowmobile
- 2006 Yamaha Attak
- LOCATION
- Cato, NY
Did you just buy it or have you owned it for a while?
Look at rails for cracks, W arm for cracks, replace stock front bushing with oilite bushings if they havent been done, rebuild/revalve shocks, check exhaust donuts and replace with copper ones if needed. Check your bulkhead and get @hibshman25 bulkhead saver or repair kit if needed.
I am in the middle of a deep dive on a 2006 Attak I purchased late last winter.
Look at rails for cracks, W arm for cracks, replace stock front bushing with oilite bushings if they havent been done, rebuild/revalve shocks, check exhaust donuts and replace with copper ones if needed. Check your bulkhead and get @hibshman25 bulkhead saver or repair kit if needed.
I am in the middle of a deep dive on a 2006 Attak I purchased late last winter.
attakbologna
Veteran
- Joined
- Jul 21, 2011
- Messages
- 33
- Age
- 47
- Country
- Canada
- Snowmobile
- 2006 Yamaha Attak
I have owned it since it had 700 miles on it.
attakbologna
Veteran
- Joined
- Jul 21, 2011
- Messages
- 33
- Age
- 47
- Country
- Canada
- Snowmobile
- 2006 Yamaha Attak
What are you doing to yours?
cnybrian
Lifetime Member
- Joined
- Oct 6, 2011
- Messages
- 476
- Age
- 52
- Location
- Cato, NY
- Country
- USA
- Snowmobile
- 2006 Yamaha Attak
- LOCATION
- Cato, NY
Ulmer Oilite bushings
@hibshman25 bulkhead saver kit & rail stiffeners
Sledtoyz copper exhaust donuts
New spark plugs
Oil & filter change
Shock revalve & rebuild
Big boy rear spring
New track
Powder coating W arms, pivot arm, bracket and A arms (if funds are still available)
@hibshman25 bulkhead saver kit & rail stiffeners
Sledtoyz copper exhaust donuts
New spark plugs
Oil & filter change
Shock revalve & rebuild
Big boy rear spring
New track
Powder coating W arms, pivot arm, bracket and A arms (if funds are still available)
- Joined
- Jun 1, 2004
- Messages
- 7,696
- Location
- sudbury on
- Country
- Canada
- Snowmobile
- 2016 apex xtx
2011 apex xtx
2009 phaser rtx/x
1997 et410t/r
1988 vk 540
you should be checking all the bushings and bearings in the skid. depending on milage, a shock rebuild/refresh might be in order. chain case oil and motor oil. check dounuts, carbides and a good once over for loose bolts/rivits.
Similar threads
- Replies
- 12
- Views
- 1K
- Replies
- 2
- Views
- 996