Lineman735
VIP Member
- Joined
- Mar 3, 2013
- Messages
- 87
- Location
- Cape Breton, Nova Scotia
- Country
- Canada
- Snowmobile
- 2016 Viper XTX LE
2010 Nytro XTX
Anyone have any issues with having, for example, an Excell or a Hindle exhaust and carrying extra fuel in back? I know with the factory exhaust a turnout is available. I have a Skidoo Linq fuel jug on back and I was wanting to add an exhaust or maybe a turbo. Anyone have this setup? Maybe some heat shielding tape? Thanks
devilnabludress
Expert
I have a full Hindle kit on mine, and am in the process of installing a Linq tank. Problem for me is to find an elbow that fits the Hindle muffler. Yamaha sells one for big $$$, just hate to order one in and have it not fit this exhaust.
Lineman735
VIP Member
- Joined
- Mar 3, 2013
- Messages
- 87
- Location
- Cape Breton, Nova Scotia
- Country
- Canada
- Snowmobile
- 2016 Viper XTX LE
2010 Nytro XTX
If I'm not mistaken, I think the one yamaha sells, is only for their factory muffler.
I have a full Hindle kit on mine, and am in the process of installing a Linq tank. Problem for me is to find an elbow that fits the Hindle muffler. Yamaha sells one for big $$$, just hate to order one in and have it not fit this exhaust.
I have a full Hindle kit on mine, and am in the process of installing a Linq tank. Problem for me is to find an elbow that fits the Hindle muffler. Yamaha sells one for big $$$, just hate to order one in and have it not fit this exhaust.
Contact Hindle, they make a turnout for their exhaust
murdered141
Snow Punisher
- Joined
- Nov 24, 2015
- Messages
- 1,456
- Age
- 43
- Location
- U.P Michigan
- Country
- USA
- Snowmobile
- Yamaha sr viper 15 ltx dx, mpi 190 turbo, straight line header, 38" mtx front end, mtx steering, mtx seat, xtx 141" skid and 2.25" power claw track
2019 sidewinder xtx le, sleeping for now
Even with a turn out tip, weather it be from Yamaha or elsewhere, your still going to need a deflector shield, my buddy's backpack caught fire on his nytro xtx, wouldn't be quite as funny with a fuel can
Lineman735
VIP Member
- Joined
- Mar 3, 2013
- Messages
- 87
- Location
- Cape Breton, Nova Scotia
- Country
- Canada
- Snowmobile
- 2016 Viper XTX LE
2010 Nytro XTX
Thanks...I'm hoping to find a Hindle system on here at some point this fall.
Contact Hindle, they make a turnout for their exhaust
Muffin
VIP Member
- Joined
- Oct 5, 2006
- Messages
- 283
- Age
- 50
- Location
- Marathon, WI
- Country
- USA
- Snowmobile
- 2014 SR Viper RTX SE
I have a full Hindle kit on mine, and am in the process of installing a Linq tank. Problem for me is to find an elbow that fits the Hindle muffler. Yamaha sells one for big $$$, just hate to order one in and have it not fit this exhaust.
I'm in the same spot. I made a mount for the Ski Doo Link gas can. The mount is awesome but I melted the can. Oops!
Attachments
Lineman735
VIP Member
- Joined
- Mar 3, 2013
- Messages
- 87
- Location
- Cape Breton, Nova Scotia
- Country
- Canada
- Snowmobile
- 2016 Viper XTX LE
2010 Nytro XTX
Wow...was that with the Hindle? I contacted Hindle to find out if they sell a turnout and they don't. May be able to take the exhaust to a good exhaust shop and have one welded on.
Sevey
TY 4 Stroke God
- Joined
- Feb 15, 2011
- Messages
- 1,742
- Location
- Collingwood, ON
- Website
- www.ty4stroke.com
- Country
- Canada
- Snowmobile
- 2018 Sidewinder RTX
I'm in the same spot. I made a mount for the Ski Doo Link gas can. The mount is awesome but I melted the can. Oops!
Yikes - A deflector of some kind is definitely in order......Those link cans aren't cheap either....
I had a saddle bags at the back once and the heat started to melt the nylon..... needless to say, the saddlebag idea was abandoned.
MS
I'll contact Lee and find out what's up....they did make one one cause the used my sled to design it...possibly they discontinued it due to low sales of the item.Wow...was that with the Hindle? I contacted Hindle to find out if they sell a turnout and they don't. May be able to take the exhaust to a good exhaust shop and have one welded on.
With regards to the pic of the melted can....that system on that Nytro is the visible muffle with the Euro tip...which you can't add a turnout to....it requires the hidden system which has a regular tip.
Any muffler shop could make one easily for a couple bucks
Lineman735
VIP Member
- Joined
- Mar 3, 2013
- Messages
- 87
- Location
- Cape Breton, Nova Scotia
- Country
- Canada
- Snowmobile
- 2016 Viper XTX LE
2010 Nytro XTX
No rush...I don't have an aftermarket system yet....still looking for a complete Hindle system. I actually found a nice piece of checker plated polished aluminum from work that I may cut down and mount in from of the fuel jug.
QUOTE="shadow44, post: 1312290, member: 9080"]I'll contact Lee and find out what's up....they did make one one cause the used my sled to design it...possibly they discontinued it due to low sales of the item.
With regards to the pic of the melted can....that system on that Nytro is the visible muffle with the Euro tip...which you can't add a turnout to....it requires the hidden system which has a regular tip.
Any muffler shop could make one easily for a couple bucks[/QUOTE]
QUOTE="shadow44, post: 1312290, member: 9080"]I'll contact Lee and find out what's up....they did make one one cause the used my sled to design it...possibly they discontinued it due to low sales of the item.
With regards to the pic of the melted can....that system on that Nytro is the visible muffle with the Euro tip...which you can't add a turnout to....it requires the hidden system which has a regular tip.
Any muffler shop could make one easily for a couple bucks[/QUOTE]
devilnabludress
Expert
Full Hindle exhaust. Made the elbow so it is suspended around the actual outlet on the muffler so vibration and cracking won't be an issue.
pedros83
Pro
- Joined
- Nov 19, 2015
- Messages
- 195
- Age
- 40
- Location
- Blackstock, ON
- Country
- Canada
- Snowmobile
- 2010 Nytro XTX
Similar threads
- Replies
- 8
- Views
- 1K
- Replies
- 857
- Views
- 125K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.