drunkenrich
Expert
Hey guys
Did the a arm bushing last year with the copper ones and wanted to see how they holded up so i put the front end on the jack tonight, bushings are good but noticed a good amount of play in my lower ball joints. Was 09 nytros covered in the recall of these? If so, is it to late to bring it to the dealer. If it is, then what kit do you guys recommend?
Did the a arm bushing last year with the copper ones and wanted to see how they holded up so i put the front end on the jack tonight, bushings are good but noticed a good amount of play in my lower ball joints. Was 09 nytros covered in the recall of these? If so, is it to late to bring it to the dealer. If it is, then what kit do you guys recommend?
Mountaintech
TY 4 Stroke God
If you're hanging onto the sled it's a perfect time to replace the garbage OEM front end. Mountaintech 43" Kit!!
drunkenrich
Expert
$800 not including shipping, wow, id rther buy ammo for duck hunting season but thanks
Mountaintech
TY 4 Stroke God
Best priced kit out there. Would you rather pay up to $1150?
drunkenrich
Expert
Id rather do none of the above
sorenson1610
TY 4 Stroke God
- Joined
- Dec 11, 2007
- Messages
- 1,746
- Location
- Rothschild,WI
- Website
- www.contrx.com
- Country
- USA
- Snowmobile
- 2016
Haha don't forget shock spherical joint mod too.....It is a very good price for that product. $800 is cheap
If your replacing the balljoints, replace with stock units. Not sure about the recall, have to check with your dealer on that one. Have you checked your spindle bushings, that is another area for wear. UP bushman kits are prob the best for replacement.
If your replacing the balljoints, replace with stock units. Not sure about the recall, have to check with your dealer on that one. Have you checked your spindle bushings, that is another area for wear. UP bushman kits are prob the best for replacement.
drunkenrich
Expert
Anyone ever use these? Reviews
http://www.zbrozracing.com/yamaha-nytro-lower-ball-joint-ars-fx-zbroz-racing-a-arms
http://www.zbrozracing.com/yamaha-nytro-lower-ball-joint-ars-fx-zbroz-racing-a-arms
sorenson1610
TY 4 Stroke God
- Joined
- Dec 11, 2007
- Messages
- 1,746
- Location
- Rothschild,WI
- Website
- www.contrx.com
- Country
- USA
- Snowmobile
- 2016
Don't think those will fit stock a arms
drunkenrich
Expert
So just go with oem ones then? How hard is the swap? Thank you
sorenson1610
TY 4 Stroke God
- Joined
- Dec 11, 2007
- Messages
- 1,746
- Location
- Rothschild,WI
- Website
- www.contrx.com
- Country
- USA
- Snowmobile
- 2016
Yes go with stockers, they are pressed into the arm and held with a c-clip. Be easier with the arms off the sled but can do it on the sled. No problem
drunkenrich
Expert
Press them in with a vice?
sorenson1610
TY 4 Stroke God
- Joined
- Dec 11, 2007
- Messages
- 1,746
- Location
- Rothschild,WI
- Website
- www.contrx.com
- Country
- USA
- Snowmobile
- 2016
There is a actual tool to press them in, ur dealer might have it. But yes a vice and socket will work just fine.
stubb111
VIP Member
NCI used to make a lower oilite kit for the bottom ball joints not sure if they still do.
sorenson1610
TY 4 Stroke God
- Joined
- Dec 11, 2007
- Messages
- 1,746
- Location
- Rothschild,WI
- Website
- www.contrx.com
- Country
- USA
- Snowmobile
- 2016
They don't make them any longer and they didn't last very long either. Better luck with the stock ones.
drunkenrich
Expert
Anyone know the cheapest oem website for the balljoints?
Similar threads
- Replies
- 4
- Views
- 790
- Replies
- 4
- Views
- 2K
- Replies
- 3
- Views
- 371
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.