Search results

So, I need to adjust belt deflection and after looking at the CVTech secondary, I'm miffed at how Yamaha didn't include the sheave separator tool. Would anyone know the bolt thread? Then, once the belt is off, how do I adjust deflection? The CVTech primary looks pretty straightforward. Where's...

I have been thinking of getting a two place enclosed and like the idea of these trailers. I have heard people complain of the tilting covered trailers. These looks to be copies of the Triton but am wondering how they are actually holding up. Any of you guys using this trailer? What do you...

Heard that the 2016 motor has changed and the 1049cc is gone. Is it true? If so, why fix what is not broken?

I am putting a boost gauge on my Nytro. Should I hook up my boost gauge line on the end of the MPI supplied T going into the throttle bodies? MPI had a hose cap on it. In the install guide, the T is shown in the pictures, figure 37A.

I need help in getting my sled ready for the mountains. I have a 2013 XTX 1.75 with an MPI 180 Supercharger. I am looking to run out west between 6500' and 9000'. I have an Ulmer stage 2 clutch kit installed and it works really well for low elevation. Any one have an Ulmer clutch set up that...

Well after years of debating, I pulled the trigger on the yamaha low elevation supercharger kit. I'm pretty pumped to get it on my XTX 1.75. I have a couple questios. Are gauges necessary? I really like the Koso X2 but don't know if I should just install the kit as is or not. how long should...

I'm looking at changing up my handlebars. I'd like to get a little more rise and maybe a better design. (Yes, I have the oft relocate.) I like the look of the skinz sport riser in the 4". Anyone have a experience with these bars. I also ride with a buddy on a poo; he has the pro tapers and...

Had an incident where I got a little high on the side of bank and came crashing down. All is ok but my handlebars got jacked up. I tried getting them bent back but believe I need new bars. I was able to take everything apart and just removed the grips and warmers. The grips came off...

I have 2009 XTX that I'm thinking of installing a new track to get more off trail traction. I currently run a 1 3/8" cobra which is a great track but it does leave me looking for more later in the year. I know a lot of people run the 1.75 backcountry but am leaning more towards the 2"...

I am looking for thoughts/comments on a couple things. This weekend I started riding and got about 15 miles away from home and blew out my rear shock. It split the shock body near the top, seems like a hydraulic blow out. My XTX has 6500 miles on it and this fall I sent them all in for a...

I have installed the Hygear torsion spring spacers in my XTX and am having troubles getting everything back together. At the same time, I also had the shocks revalved. It has been a while since I put took it all apart. I believe I got the shock and the rods all in correctly but the torsion...

I have a new to me '09 Nytro XTX that I got the shocks revalved. I took the skid apart awhile ago and have lost track of how it all came apart. I also installed the hygear torsion spring spacers. Well, now I am having a hell of a time getting the rear center shock back in and figuring out the...

I am trying to replace all bearings and have run into a couple hang ups. :o| First, how do I get the jack shaft and bearing out of the housing on the PTO side? Is it pressed in? I've tried pounding it towards the chain case but no luck yet. Second, I was able pound the inside chain case...

Just wanted to say that I am very impressed with the MPI Oilite bushings. Last night, I installed them in my XTX front end. I recently bought the sled and found nearly new OEM bushings upon removal. However, the comparison was immediately evident. When lifting the spindle with the OEM...

So I see the RTX came with extroverts in 2010. Can I put this whole assembly, shaft and drivers in my 09 XTX? It is a 9 tooth driver, but unsure of pitch. The part numbers on the drive shaft appear to be the same.

In doing my preseason work cleaning the carbs, installing apex rad., water temp gauge, etc. I noticed what seems to be very little rebound in the rear suspension on my RX1. My sled has about 3500mi on it and is original to the sled. Would the shocks or springs be shot? If so, which one...

Ok, I am tired of the idiot light and decided to install a standard 2" mechanical gauge. Could a guy install the sending unit into the thermostat housing rather than installing a Tee in the coolant line? What would happen when the light sender is removed? Would the CPU think something is...

I've never replaced these. My question is, do I need a puller to get the stock bearings out? I've removed the clips on the front and back of the bogey, pulled the wheel off and now the bearing is stuck on the shaft. Once removed, how do I get them back on?

Can anyone help with ideas to remove the upper sprocket nut (36mm) in the chaincase? We can not get it loose. We are holding on to the driven clutch with all that we can and it still spins. Also, we broken the shaft in the chaincase that holds the tensioner. Any thoughts on welding it in...

Any ideas what would cause a track to freeze after a short trip? Seems like the hyfax are freezing to the track clips. Have tried loosening the track and still have the problem. Oddly though is that the hyfax don't show too much wear. :o|