northof50
Lifetime Member
- Joined
- Dec 30, 2013
- Messages
- 119
- Location
- Northern ,mb
- Country
- Canada
- Snowmobile
- 14 viper LTX Deluxe
Hello,
I was looking for a gauge pod that would blend in with the factory dash board.
Is there any on the market, or do I have to do this myself?
I am looking to mount an AFR gauge & boost Gauge.
Thanks for your help.
I was looking for a gauge pod that would blend in with the factory dash board.
Is there any on the market, or do I have to do this myself?
I am looking to mount an AFR gauge & boost Gauge.
Thanks for your help.
tator
TY 4 Stroke Junkie
not sure if there is any out there that will look "factory" but this is what i did to keep the factor look and keep it clean. its a 8 dollar bicycle handlebar bag
that fits the gauges and holds all of the extra wires perfectly. the gauges and gauge bracket are from hurricane performance.
th
that fits the gauges and holds all of the extra wires perfectly. the gauges and gauge bracket are from hurricane performance.
th
stingray719
TY 4 Stroke God
not sure if there is any out there that will look "factory" but this is what i did to keep the factor look and keep it clean. its a 8 dollar bicycle handlebar bag
that fits the gauges and holds all of the extra wires perfectly. the gauges and gauge bracket are from hurricane performance.
thView attachment 97759View attachment 97760
Very cool!
Nice! Stealth too. Well done.
Speaking of gauges. I worry someone will steal my stocker. I can remove it in two seconds.
northof50
Lifetime Member
- Joined
- Dec 30, 2013
- Messages
- 119
- Location
- Northern ,mb
- Country
- Canada
- Snowmobile
- 14 viper LTX Deluxe
Nice work!not sure if there is any out there that will look "factory" but this is what i did to keep the factor look and keep it clean. its a 8 dollar bicycle handlebar bag
that fits the gauges and holds all of the extra wires perfectly. the gauges and gauge bracket are from hurricane performance.
thView attachment 97759View attachment 97760
Thank you. For the input.
I now have a plan!
petey_sx700
VIP Member
- Joined
- Nov 17, 2013
- Messages
- 132
- Location
- Central, WI
- Country
- USA
- Snowmobile
- 2017 Sidewinder LTX DX
2017 Viper STX DX 146
2013 Vector
2018 SRX 120
- LOCATION
- West Central Wisconsin
Like the stealth mount. Was told that Pat's in Greenland MI had a push turbo sled this winter and that they had mounted the gauges into the black plastic flares that are on each side of the steering column. Basically on each side of the handle bar bag. I did not see it first hand and would love to see a pic if anyone has one. The flares are about three inches wide just before the stock gauges and there is nothing for four inches under them. Was thinking the two inch gauges from AEM would fit in there fairly well. Just another idea.
northof50
Lifetime Member
- Joined
- Dec 30, 2013
- Messages
- 119
- Location
- Northern ,mb
- Country
- Canada
- Snowmobile
- 14 viper LTX Deluxe
Thank you.
yamadoo
Yamadoo is a snowmobile ' aholic'.
- Joined
- Jun 3, 2003
- Messages
- 3,645
- Country
- USA
- Snowmobile
- 15 Viper STX DX red/white- GPS and KING AIR suspension 4kmiles
13 Apex XTX 45 anniversary RED/WHITE/BLACK 3K miles
10 Vector LTX Blue 9kmiles
11 Venture GT 4k miles
86 SnoScoot(2) for grand kids
Now that is cool, sleeper cool!!!!
Adams574
Extreme
- Joined
- Jul 2, 2014
- Messages
- 60
- Age
- 41
- Country
- USA
- Snowmobile
- 2015 Viper LE Mpi turbo 162
2012 Nytro MTX 153
2009 Nytro XTX 144
Previous
2009 Summit 800
2008 Summit X 800
2007 Apex warrior
2007 Summit 800
2006 Summit 600
2006 MXZ Renagade 600
2004 RX-1 Mountian
2002 RMK 800
1996 ZR 580
1988 Cougar 500
1985 kitty cat
Does anyone know if you can mount the gauges in the dash to the left or right of the steering post? Cat has their intake vents pulling from that spot so if yamaha has not filled it with something it should be ok.
Yamadog
Lifetime Member
Like the stealth mount. Was told that Pat's in Greenland MI had a push turbo sled this winter and that they had mounted the gauges into the black plastic flares that are on each side of the steering column. Basically on each side of the handle bar bag. I did not see it first hand and would love to see a pic if anyone has one. The flares are about three inches wide just before the stock gauges and there is nothing for four inches under them. Was thinking the two inch gauges from AEM would fit in there fairly well. Just another idea.
Yes they do have them there but they are unreadable when driving the sled.
Yes they do have them there but they are unreadable when driving the sled.
Here is what I have done
Yes they do have them there but they are unreadable when driving the sled.
Here is what I have done
Yamadog
Lifetime Member
What I meant was they are facing upwards in those holes and tucked under the handlebars. You cannot read them when driving fast or at WOT like a gauge that is mounted just below the windshield lip above teh dash pod.Yes they do have them there but they are unreadable when driving the sled.
shagman
Vendor
- Joined
- Feb 18, 2014
- Messages
- 1,059
- Age
- 58
- Location
- Cedarville Michigan
- Country
- USA
- Snowmobile
- 2017 Sidewinder BTX LE
2014 SR Viper XTX SE (Sold)
OSP makes a few different ones. Take a look on their site. Here is a link.
http://www.ospracingparts.com/yamaha-viper-2-gauge-mount-powder-coated/
http://www.ospracingparts.com/yamaha-viper-2-gauge-mount-powder-coated/
Similar threads
- Replies
- 17
- Views
- 3K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.