upei93
TY 4 Stroke Guru
- Joined
- Apr 27, 2008
- Messages
- 942
- Location
- Dalhousie, NB
- Country
- Canada
- Snowmobile
- 2015 Viper X-TX LE MPI turbo
2009 Nytro XTX
All set on the front now . I pulled the trigger on the Mountain tech a arms. 43'' X 2''. now to get the Star kit ... next week MAYBE. any body have this same set up on a XTX???
Yup...Twiz28 and I do.
Broue
Extreme
- Joined
- Feb 28, 2015
- Messages
- 54
- Age
- 47
- Country
- Canada
- Snowmobile
- FX Nytro XTX 2009,
Factory race front end
Star suspension relocation kit and revalve
Ski Doo #503192064 center spring
135 mm idler wheels
Oilite bushings
Grizz steering relocator
Tuner ski : 6 ''carbides,
WRP seat
Vector gauge
Custom Taillight
LinQ tank
Sno Sport 1990
Ski Doo Tundra R 1998
I have the same set up... the sled is great...
Only last concern : steering effort
For the next season: I'll change my carbide combination ( 6 inch in/ out) to 6 inch in/ and 0 out).
and install Grizz steering relocation...
Only last concern : steering effort
For the next season: I'll change my carbide combination ( 6 inch in/ out) to 6 inch in/ and 0 out).
and install Grizz steering relocation...
stubb111
VIP Member
sprintcat..... I ran the star kit with a stock front end for a season and got it dialed in really well, I would suggest shortening the centre shock as suggested by star and using his shock revalving. For the money / results you can't beat his kit. The OFT relocate is a good item as is a taller seat.... in my opinion there's a lot to be said for proper set-up with the nytro and your riding style, it is very sensitive to changes and there's not really an across the board set-up that works for everyone, like with the apex / vector. it should be set-up for each individual rider (weight, riding style, etc....). this is just my .002
cheers
cheers
Sledboy
Pro
SprintCat,
I have a 2013 XTX and the Star Suspension kit was my 1st mod after riding one month. Before the following season I installed the Mountain tech a arms. 43'' X 2'' and know it's steers like it's on rails. It's a completely different sled with these mods and makes the Nytro all it should be.
I have a 2013 XTX and the Star Suspension kit was my 1st mod after riding one month. Before the following season I installed the Mountain tech a arms. 43'' X 2'' and know it's steers like it's on rails. It's a completely different sled with these mods and makes the Nytro all it should be.
sprintcat
Expert
sprintcat
Expert
sprintcat
Expert
sprintcat
Expert
Does any body know why the front bracket on the front shock has two holes in it ? The holes that look like the number 8!
200
Veteran
- Joined
- Nov 23, 2014
- Messages
- 30
- Age
- 55
- Location
- Nova Scotia
- Country
- Canada
- Snowmobile
- 2010 Nytro XTX
Star star star! Honestly THE best single mod I've done. Taller seat, OFT plus new split rails are all $$$ well spent but the Star is the s**t
sprintcat
Expert
Did you do the center spring upgrade ?
200
Veteran
- Joined
- Nov 23, 2014
- Messages
- 30
- Age
- 55
- Location
- Nova Scotia
- Country
- Canada
- Snowmobile
- 2010 Nytro XTX
Yes at Roberts suggestion, and the shortening, as well as the revalve on both. Funny story.....when I finished, the front skis were on the doilies, and the track was flat on the garage floor, I pushed on the rear bumper, which promptly dropped 5" with almost NO effort, plus did not return up! Heart stop!
Called Robert and first thing he asked was the skis on doilies and skid flat.....completely normal.
What that highlighted to me was how soft( and turns out compliant) the rear of the skid will become after the mod. Amazing design
Called Robert and first thing he asked was the skis on doilies and skid flat.....completely normal.
What that highlighted to me was how soft( and turns out compliant) the rear of the skid will become after the mod. Amazing design
sprintcat
Expert
Did you run the spring preload all the way up ? Because it sounds like they are talking about the stock spring in the instructions. They say the spring is weak so run it all the way up, I got the aftermarket spring it's heavier. So I am not sure what to run it at
200
Veteran
- Joined
- Nov 23, 2014
- Messages
- 30
- Age
- 55
- Location
- Nova Scotia
- Country
- Canada
- Snowmobile
- 2010 Nytro XTX
Heavier front shock spring. From Robert at Star. Mid position as far as preload. Rear torsion springs set soft
200
Veteran
- Joined
- Nov 23, 2014
- Messages
- 30
- Age
- 55
- Location
- Nova Scotia
- Country
- Canada
- Snowmobile
- 2010 Nytro XTX
And yes rears are stockers
sprintcat
Expert
Okay thanks 200
Similar threads
- Replies
- 17
- Views
- 3K
- Replies
- 2
- Views
- 2K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.