Search results

Too bad you chose the intense , your probably going to loose a couple miles per hour on the top since its 2 lbs heavier

Fatchance i totally agree with you , maybee its the type and amount of studs there using adding more weight will definatley slow you down all i can say is i have 2000 miles on mine so far with absolutly no signs of wear or torn lugs for $500 you can't beat it, off topic what do you think of the...

Read the last thing said less rotating mass. the cobra track doesn't slow your sled down it increases your speed by 5-10 mph , i cant understand why there are claims of slower top speed ,are we talking about the same track 121" x 1.38" fully clipped at 37 lbs this track is outstanding and...

What don't you like about the cobra track , its the best track i ever ran on a sled being 37 lbs and fully clipped , the ripsaw was the worst track ever with every third window closed

How do we become a vip member?

Whats the angle of your helix start to finish , how many gram weights are you running ,i been running an overdrive and polaris/yamaha clutch kit for ten years now these motors rock when you unleash the power

Get the multi angle shockwave for the apex ,use 66 gram polaris weights and pins yamaha orange primary and yellow secondary plus if you are able to or bring to a machine shop and machine an overdrive into your clutches and the ETECS will be looking at your snowflap all day long, been running...

I'm in Canada, Sault Ste Marie. Not sure why that's not in my profile i'll update it when i get time

I'm curious , how does oil affect compression ratings?

you need to ditch the stock weights and spring ,install 66 gram polaris weights and pins grind the tips slightly so they clear yamaha orange spring seperate the primary machine 30 thou off each side at the bottom 60 thou off the split collar buy a multi angle shock wave helix machine 60 thou off...

Buy a multi angle shock wave helix then you can dial it right in for the rpm you need, what helix are you running , change your primary weight to 66 gram polaris and grind the inside tips a bit so the clear use polaris pins , how much did you take off the primary sheaves and split collar?

Roughly 40 , should drill some extra holes to ensure it fits tight again

Should consider 0w 30 mobile 1 full synthetic.

11mm

You can buy a helmet that has pockets desinged for speakers, i used the budwiser speakers you get free in a case of beer and removed them from there cardboard case and slide them in , they connect with a 3.5 mm jack , cheap and sound good but not blutooth

u so smart

Been running the shock wave for ten years now, works extremely well when combined with the over dive setup.you need to ditch the stock weights and spring ,install 66 gram polaris weights and pins grind the tips slightly so they clear yamaha orange spring seperate the primary machine 30 thou off...

buy a multi angle shock wave helix there 16 degrees adjustable done right on the sled

OEM only

Go to canadian tire buy a mechanical temp guage for $20 and a copper water tap for $5 , unscrew the tap thow it away then thead in the adaptor from the guage solder it in, cut he hose in front of the brake disc put the tap assembly in install 2 hose clamps install the guage above the...